how to calculate cement coefficient for 20mm thick vitrified
tiles flooring with cm 1:4 with explaination
Answers were Sorted based on User's Feedback
Answer / karthik rajendren
20mm thick flooring means,12mm thk mortor bed + 3 mm thick
cement slurry.The normal thicknes of Vitrified tiles is 5-
6mm.
So,Cement reqiured for 12mm thk bed mortor is 0.11 bags/m2,
As per CPWD the requirement cement for Slurry is 3.3Kg/M2
Is This Answer Correct ? | 21 Yes | 7 No |
Answer / amritalib
0.020 x 1/4=0.005
0.005 x28.25 =0.141 beg
0.141 begs
Is This Answer Correct ? | 4 Yes | 3 No |
Answer / deepak katyal
Volume of mortar in 1 sq. mt= .012*1*1=.012
dry mix= 0.012*1.5= 0.018
Cement= 0.018/5*1440/50= 0.104 Bag
Is This Answer Correct ? | 5 Yes | 5 No |
Answer / ramesh kumar pandey
VOLUME OF MORTAR IN SQMT = .012*1*1=.012
DRY MIX = 0.012*1.52 = .01824
CEMENT = .01824/5*1440/50 =0.1050624 = 0.11 BAG PER SQMT
Is This Answer Correct ? | 2 Yes | 3 No |
How find out Rolling margin of steel dia.wise?
what is 3.14 indicates for cutting length of stirrups
How we decide the depth and size of footing? Give a example?
if a pipe those configuration (ASTM c 76 class b 450mm dia 2500mm length) fixing for water course those lining of water is 7000 running meter. my question is that if 8 joints of pipe ls leakage and we have not permission to stop the water so which treatment we apply on joint in that in condition.
Quality control
how much steel is required foe following components.. footing- plinth beam- column- beam- slab-
what is the basic difference between a singly reinforce section & a doubly reinforce section?
how to create our resume?
0 Answers Sunraj Construction,
for solid cement brick without fly ash,we use dust,6mm,12 mm jelly,water my question is what Proportion we mix dust,6mm,12 mm jelly,water ? for good strength brick.
How is rate analysis prepared for M 25 grade of concrete?
minimum dia of manhole cover should be A] 50 cm B ] 100 cm C ] 75 cm
Why the height of the bridges over the river are very low?