1- XC and the RC time constant are both measures of the
reaction of C to a change in ____?
2-The power factor is a numerical ratio with a value
between 0 and 1 equal to the ______________ of the phase
angle.
3-When V and I are out of phase because of reactance, the
product of V times I is called ______________ power
4-For _____________ inductors, the branch currents can be
added algebraically.
5- The ______________ power in watts can be calculated as
I^2R
6-Calculate XL with L = 30mH and f = 1kHz ( I have Xl=2piFL
2*3.141592653*1kHz*30mH
=188 ohms Please check)
7-A parallel RL circuit has the values, R = 5kohms, XL =
5kohms. A voltage source of Vt = 10Vrms is connected in
parallel to R and L. Determine the total current, It
delivered by the voltage source Vt.
8-A series RC circuit has R = 1Mohm and C = 1microF. How
long would it take for the capacitor to fully discharge if
it is initially fully charged?
9-A circuit has real power = 300W and an apparent power of
500VA. Determine the power factor and phase angle.
10-The time constant for an LR series circuit is T = 0.1s
and R = 10ohms. Calculate the inductance L.
No Answer is Posted For this Question
Be the First to Post Answer
in single phase circuit if i connect a heater between phase and neutral, then what will be the current path? phase to neutral or neutral to phase.
what you mean swtchgear(electrical)
What are the Full Forms of TVM, MTL, CVT ?
Why do you use an isolator on both sides of the circuit breaker? ( shortly answer)
In power transformer tappings are provided on A high voltage side B low voltage side C In middle of both the windings D both high and low voltage side
What are the advantages of vscf wind electrical system?
From an electrical motor & electrical generator, which has more efficiency & why?
what is the need of representing AC power in sinusoidal waveform? why not in square or rectangular etc...
what is stay bow?
what are difference between indoor and out door substation
is it possible to convert electrical energy to light energy for transmission purposes?
Whatis the current capacity of 33KV/ 0.433KV transformer on Primary and secondary side/
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)