Answer / sundar

remain liquid state

Answer / dharam

Saturation temperature means boiling point.
water at its B.P. starts boiling to its vapour phase.

Are there any alternatives to scraping a shell and tube if a capacity increase will make the pressure drop across the exchanger too large?

0 Answers  

---

Question 101 - (a) Let | A > = (Aa Ab Ac), | B > = (Ba Bb Bc), | C > = (Ca Cb Cc). Find | A > + | C > - | B > in term of Aa, Ab, Ac, Ba, Bb, Bc, Ca, Cb and Cc. (b) Let d | E > = d (Ea Eb Ec) = (d Ea d Eb d Ec). If | E > = (6 7 8), find the value of 10 | E >.

1 Answers  

---

ENVIRONMENTAL ENGINEERING - QUESTION 22.3 : A well delivers 225 US-gallons per minute of water to a chemical plant during normal system operation. (a) Calculate its flowrate in the unit of mega US-gallon per day or MGD. (b) The following formula is written next to the chlorine feed point : (chlorine feed rate, lb / day) = (flowrate, MGD) X (dose, mg / L) x (8.34). If this formula is correct, then what should the chlorine feed rate to be in pounds per day (lb / day) if the desired dose is 2 mg / L. (c) Prove by calculations that the constant 8.34 in the formula next to the chlorine feed point is correct. Let 1 US-gallon = 3.78541 L and 1 mg = 0.0000022046 pound.

1 Answers  

---

Why in a continuous plant for a Hot standby screw pump system the interlock for auto starting of the other pump ( when the running pump stopped suddenly) is given with header pressure only? why not with flow rate or current of the pump?

0 Answers   Haldia,

---

What are the specialized grinding methods?

0 Answers  

---

---

i badly need a chemical process details for making a project...plz help me out......i m a btech final yr chemical engg student in a govt univ,and we have to make a detailed project on any chemical process with contents like...intro,kinetics , material balance,thermodynamics,process layout,process design,physical conditions,plant location,cost estimation etc.............if any one could help me i will never forget hi thankless work and always try to help u in whatever u ask.............

1 Answers   HPCL,

---

REACTION ENGINEERING - EXAMPLE 13.2 : A batch reactor is designed for the system of the irreversible, elementary liquid-phase hydration of butylene oxide that produces butylene glycol. At the reaction temperature T = 323 K, the reaction rate constant is k = 0.00083 L / (mol - min). The initial concentration of butylene oxide is 0.25 mol / L = Ca. The reaction is conducted using water as the solvent, so that water is in large excess. (a) Let the molecular weight of water is 18 g / mol and the mass of 1 kg in 1 L of water, calculate the molar density of water, Cb in the unit of mol / L. (b) Determine the final conversion, X of butylene oxide in the batch reactor after t = 45 min of reaction time. Use the formula X = 1 - 1 / exp [ kt (Cb) ] derived from material balance. (c) Find the equation of t as a function of X.

1 Answers  

---

Which book I should refer for designing heat exchangers and reactors?

1 Answers  

---

Define an additive?

0 Answers  

---

We are having proplem with the persperation smell in ETT/ECHO room in our cardiac hospital.The 2 Ton of AC is not conditioning the environment. We have to use exhaust fan to through out of the room bad air. Could anyone suggest how to coup with this effectively using chemical engineering. Any permanent solution to neutralise the bad smell.The Air freshners are not doing enough instead making a bad odour.

0 Answers  

---

Question 76 - Let C% be the fractional crystallinity, Rs = density of sample, Ra = density of amorphous form and Rc = density of crystalline form. In a polymer, these unknowns could be related by the equation C% = (Rc / Rs) (Rs - Ra) / (Rc - Ra). (a) Find the equation of Rc as a function of C%, Rs and Ra. (b) Two samples of a polymer, C and D exist. For sample C, C% = 0.513 when Rs = 2.215 unit. For sample D, C% = 0.742 when Rs = 2.144 unit. Both samples C and D have the same values of Ra and Rc. Find the values of Ra and Rc in 6 decimal places.

1 Answers  

---

What are some of the consequences of an undersized kettle type reboiler?

0 Answers  

---