Structural steel: For a thumb rule check in field, the allowable weight which

Structural steel: For a thumb rule check in field, the
allowable weight which can be hung down for 10mm dia mild
steel rod, of yield value of 0, 25 KN/mm2 and applying a
factor of safety 2.00, will be how many kg?

Question Posted / n t

3 Answers
10213 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

Structural steel: For a thumb rule check in field, the allowable weight which can be hung down for..

Answer / somnath dutta

total load can carry= .25*area of the bar(78.53)=19.63KN
if the F.O.S.=2, then the ultimate load on
it=19.63/2=9.81KN=9.81 x 100 = 981 kg ( 1 KN = 100 Kg)
therefore, the maximum load is 981kg.

Is This Answer Correct ?

7 Yes

0 No

Structural steel: For a thumb rule check in field, the allowable weight which can be hung down for..

Answer / milaim

yield value:0.25 KN/mm2
Ø10mm Area=5² x 3.14=78.53 mm²
SF is 2
0.25 x 78.53=19.63 KN/2=9.81KN x 100Kg=981Kg

Is This Answer Correct ?

2 Yes

0 No

Structural steel: For a thumb rule check in field, the allowable weight which can be hung down for..

Answer / subhankar karmakar

total load can carry= .25*area of the bar(78.53)=19.63KN
if the F.O.S.=2, then the ultimate load on
it=19.63/2=9.81KN=9.81/9.8 kg=1 kg
therefore, the maximum load is 1kg.

Is This Answer Correct ?

1 Yes

4 No

Post New Answer

More Civil Engineering Interview Questions

explain water proofing in toilets and terrace

2 Answers L&T,

WHERE CAN I GET THE PREVIOUS QUESTION PAPERS OF APGENCO FOR THE THE POST OF Tr.ASSISTANT ENGINEER(CIVIL)

0 Answers

civil engineering means abut

11 Answers Maytas,

7. Do you apply the skills and knowledge learnt at school in your work?

1 Answers

how to find the cement bags and sand requirements for the one square meter of internal,external,ceiling plastering by using the various ratios like 1:3,1:4,1:5,1:6

0 Answers

What is the mixing ratio of M7.5,m10,M30,m35&m40?

15 Answers Reliance, Umiya Construction,

WHAT IS DIFFERANCE BETWEN TOR STEEL AND TMT STEEL

4 Answers BARC, L&T, ONGC,

what is the difference between tsp & tower

0 Answers

What in bending moment, if a moment is free end of cantilever beam?

0 Answers

what qualifications did you need to become a civil engineer?

2 Answers L&T,

providing, fixing, removal of pockets of size 100*150*300mm to 500*600*1000mm for foundation. the shuttering material used for making &fixing of pockets shall be removed by the contractor without damaged to pockets. if any damage occurred, the same shall be rectified by the contractor is to handover the pockets to forge shop engineer with proper marking of centre lines, levels etc.

1 Answers

How many bag of cement used in all type of RCC

3 Answers

For more Civil Engineering Interview Questions Click Here