Answer / k.prakashchandra

To have the insulators equally spaced from each other ,V
x-arm and single top fitting were being used. Now we are
using straight X-arms which are also called 'special X-arms'.

TRAFO 1. WHY BREATHER IS USED. 2. WHY OIL GOES DOWN IN CONSERVATOR TANK. 3. WHY WE ARE TAKING OIL SAMPLE TAKING FROM BOTTOM OF TRANSFORMER. 4. HOW TO CHECK IR VALUE OF TRANSFORMER. 5. WHY OLTC HAVING BUCHHOLZ TRIP ONLY; WHY NO ALARM. 6. OFF LOAD TAP CHANGER OPERATION PROCEDURE. 7. TR. SHUTDOWN / ISOLATION PROCEDURE. 8. WHEN THREE TRS. IN PARALLEL, ONE TR. IS NOT SHARING THE LOAD – WHAT IS REASON AND WHAT YOU WILL DO. 9. WHY TR. HAS OLTC IN HV SIDE. 10. WHAT IS % IMPEDANCE. 11. WHY TR. RATING IN MVA. 12. WHAT IS VECTOR GROUP IN TR. 13. CONDITION FOR PARALLEL OPERATION OF TRS. 14. WHAT IS TERTIARY WINDING. WHERE IT WILL BE. 15. IF TR. TRIP ON BUCHHOLZ OR TAP CHANGER RELAY, WHAT YOU WILL DO. 16. DIFFERENCE BETWEEN OIL TEMP. AND WINDING TEMP. PROTECTION 17. HOW WINDING TEMP. IS MEASURED IN CAST RESIN TR. 18. DIFFERENT TYPES OF FAULTS IN TR. Trafo - Page-1 of 2 19. WHAT HAPPENS WHEN TR. CHARGED FROM LV. 20. WHAT WILL YOU DO IF MEGGER READING SHOWS ZERO BETWEEN LV WINDING AND EARTH. 21. CAN WE INTERCHANGE BUCHHOLZ RELAY OF MAIN TANK AND OLTC TANK. 22. IF THE LINE BETWEEN BREATHER AND CONSERVATOR TANK 23. LOCKED, WHAT WILL HAPPEN DURING LOAD CYCLE. 24. WHAT IS THE FUNCTION OF OIL SEAL IN BREATHER. 25. WHAT ARE LOCATIONS FOR BUCHHOLZ RELAY FIXED IN POWER TR. 26. WHAT ARE CHECKS IN POWER TR. DURING MAINTENANCE. 27. WHAT IS IMPORTANT WHEN WE CHECK OLTC OPERATION DURING MAINTENANCE. Trafo - Page 2 of 2

0 Answers   KSEB,

---

WHAT IS THE MINIMUM IR VALUE FOR CABLE CHARGING

4 Answers   Google,

---

Classify the different types of load.

6 Answers  

---

if the supply frequency increases what happens to the motor load

2 Answers  

---

Why is the electric shock from the DC supply is more dangerous than the shock from AC supply.

8 Answers   IBM,

---

---

WHAT IS THE PARTIAL DISCHARGE TEST?

0 Answers   ME,

---

1. Can a 12v DC choke operate a 60v/12w PL lamp ? 2. Can a 230v ballast fire / operate a 60v/12w PL lamps.

0 Answers   ICS Integrated Computer Solutions,

---

why synchronization done in clockwise direction?

12 Answers   Hindalco, NTPC,

---

WHAT HAPPENED HT MOTOR FEED WITH LT SUPPLY

1 Answers  

---

whay we transmit power in 3phase no in 4 or 2 or 5......etc?

4 Answers   CCCL,

---

what is the difference between 50 hz freq. and 60 hz freq.? which is better and economic in them ?

0 Answers   Faurecia,

---

what is a power factor?

0 Answers   MPWU Kiribati, Thermo,

---