Answer / Ankit Mohan Bhatnagar

To operate a soot blower for a boiler, follow these steps: 1. Isolate the soot blower from the system. 2. Attach the hose to the nozzle located inside the boiler or economizer. 3. Turn on the air supply and adjust the pressure to the recommended level (usually 40-60 PSI). 4. Slowly open the soot blower valve while maintaining control of the air supply. For an economizer, the process is similar but may require additional precautions due to its heat exchanger design. Always consult the manufacturer's instructions for proper operation.

What are steam turbine parts usually come into damage?

1 Answers   RRB,

---

What is the purpose of liquid receiver?

1 Answers   RRB,

---

id fan impeller vane direction &rotation direction

1 Answers  

---

At what principle Air Compressor Works?.. What are the rule governing air compressor operation:

2 Answers   DAE,

---

What is a mechanism?

1 Answers  

---

What will be the cause of the loose compression in a cylinder?

3 Answers  

---

Properties of F.O. the cause damage on auxiliary boiler.

1 Answers   RRB,

---

Who built the trans alaska pipelene?

1 Answers  

---

Why two stroke engine can’t be used in cars?

4 Answers  

---

why the wear of back tyre takes place more rapidly than front?

1 Answers  

---

what should be the correct duration of slow firing of the coal based and biomass boiler?

1 Answers  

---

How to calculate the no of straps required to hold a bar bundle which varies in different length? Ex say 6M bar ,weights 1.3 ton with 250 bars in the bundle.

1 Answers  

---