What is RCBO? hw it works

Question Posted / udayak25

2 Answers
4926 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

What is RCBO? hw it works..

Answer / sms

RCBO Protects against any residual Current/Earth Leakage
current in the ckt, is more than its rated sensitivity say
30 mA/100mA. Also its protect against any short ckt.
One more thing , RCBO, ELCB, RCCB or GFCI ,All are same.

Where as MCB protect against only Short ckt current more
than its rating.

Is This Answer Correct ?

3 Yes

1 No

What is RCBO? hw it works..

Answer / rinson.av

RESUDUAL CURRENT CIRCUIT BREAKER WITH INTEGRAL OVERCURRENT
PROTECTION

This divice is worked as both RCCB and MCB

Is This Answer Correct ?

1 Yes

1 No

Post New Answer

More Electrical Engineering Interview Questions

what is the different between second harmonics and third harmonics ?

1 Answers

What is the formulae of Megger value for a A.C.Motor

0 Answers

how to interlock 2 incomer,1 buscoupler MCCB,like we interlock an ACB... pls answer this question and if possible send me the ckt diagram..

2 Answers

When testing an earthing connection, we use a 60 or 100 candle bulb with a phase connected direct from supply and the other wire to the new earthing provided.If the bulb glows then the earth is ok.Else earth connection is not Ok. So, why dont we can use all the home appliances taking a single wire from the phase and the return connection to Earth instead of return connection to neutral?

2 Answers

Why does the power consumed is always constant even if a fan speed is altered?

5 Answers

why tube light flicks??

1 Answers

which type of A.C motor is used in the fan (ceiling fan, exhaust fan, padestal fan, bracket fan etc) which are find in the houses ?

25 Answers Airtel, MPPTCL, USSA,

what is under coal gassification?

0 Answers

How Self works in DG set

0 Answers

Can you used moeller lzm1 mccb in a dc system with 125vdc and 20ka short circuit current , beside is it have 24 or 48 volt shunt ? Beside how long current can through from An MCB shunt contacts? (like Z7-AS 24 V)?

0 Answers

When distance between two pulleys is not fixed, the tension of belt is adjusted by a) driver shaft b) driven shaft c) adjustment screw d) belt

0 Answers BMRCL,

how to calculate the cable size in sqmm if load (kw) is given?

5 Answers

For more Electrical Engineering Interview Questions Click Here