Answer / sunil guru

HARMONICS --- BASICALLY ARE THE INTEGRAL MULTIPLE OF FUNDAMENTAL FREQUENCY.... WHICH CAUSES DISTORTION AND DISTURBANCES IN THE SYSTEM.....
AND IT RESULTS IN CHANGING OF THE SINUSOIDAL WAVE FORM..
SO THAT SYSTEM IS NOT GETTING PURE SINE WAVE AND ITS LOSSES ARE INCREASED AND WORKING EFFICIENCY IS DECREASED....

for any disagreement mail me at parmar20072008@yahoo.com

Answer / sharif enam

when a aperiodic signal is Fourier transformed we get many
sinusoid-es of different frequencies.They are called
harmonics. The frequencies which matches with the original
signal frequency is called first harmonic or fundamental.

Answer / javad ahamad

before 1960 actually harmonics was very little.but todays world we have so many electronics equipments like computer, tv,washing machines ect...these equipments draw some more current for short interval of time.therefore the actual sinusoidal wave hasbeen changed for that time.this is happen in all the distribution system.it s the odd multiple of fundamental wave,like 3rd harmonic,5th harmonic ect...we r using harmonic filter to avoid it..

what are iron and copper losses

4 Answers  

---

What are the reasons for AVR failure in LT DGsets ?

2 Answers  

---

What is the function of a pressure Switch in a Substation?

2 Answers  

---

why we do 2 types of earthing on tranformer ie:body earthing & nutral earthing , what is function. i am going to instal a 5oo kva tranformer & 380 kva DG set what should the earthing value

8 Answers   Altrion Technologies,

---

what is the function of choke in the flourcent tube lights and why the colour is in white mostly in flourcent tube lights

0 Answers  

---

how copper and aluminium wires or cables are choose for current rating? please provide copper and aluminium wire selection chart for different current rating ?

0 Answers  

---

A 400KVA Transformer has 400Hz frequency.if frequency is changed to 50Hz,then what will be the new KVA rating?

2 Answers   ABC,

---

What is ST and specify its range of voltage.

0 Answers  

---

What is the loss of power of transformer 220kv/33kv,63/80mva of % imp12.05 at 80%load

0 Answers  

---

in an industrical wiring, why we are using lighting DB and Power DB separately?

3 Answers  

---

how to find out 3 phase complex power in per unit in unbalanced system?

0 Answers  

---

there is a power transformer 66/11kV in delta-delta connection has 5 feeder coming out from the secondary side. One of the feeder in it normally loaded (loaded than other feeder)and this feeder usually trips with double OCR causing the bank transformer to trip. Now if the load of this feeder is put on other transformer then that no problems occurs on that transformer or the load. However normally all the test(IR, PI, short ckt, open ckt,grounding test and other ) has been conducted for this but evertything transformer..... I am not geting what is the actual problem...

2 Answers  

---