Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379) Explain with examples of circuit protecting device apart from fuse, circuit beaker, relays, lighting arrestor, switch gears?
358275 kw motor take 45 amp in no load delta in star 10 amp but in load it will take 160 amp but IR velue of winding above 500 at 1kw ph to earth and ph to ph. what problem it should be?
3725We wanted to know how to impart various colors to copper wire by simply dipping them into various chemicals, formulations, etc. This copper wire is to be used by us for our hobby of making various art objects from copper wire.
1063Explain how can I evaluate the thermal relief requirements for double block-in of 98% sulfuric acid?
1068
What is the power requirement of a refrigerator?
What is the procedure and technnology behind jointing of prestessed block in Delhi metro rail project.
How many types of oil spilling available?
Tell me why is 400 hz used for flight instruments and radio transmission system in aviation industry universally?
How reactor of SBR installed , is it be over ground, fully under ground or semi sunk ?
What is carbide?
What was the weight of bhaskara?
What's mean HVF & HAF in Vacuum Circuit Breaker?
Define what is a silver and deming drill bit?
How we can determine short circuiting current any plant and for example a plant which power generation is 415 volts and plant load is 500 kw.
in valve is constructed as per SME B 16.34, then which standard is used for fire testing of valve?.
What a test plan contains
We normally make oil soak pits under Transformers. Oil from soak pit goes to collection pit. We provide granules/pebbles under transformers. My question is weather granules/ pebbles to be filled in soak pit or not? if yes upto what level?
How to check vortex flow meter is in good condition while we do not having calibration setup?
Volume of 25kg putty bag & 40 kg putty bag volume??