Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379) -----------means a source which can supply a constant voltage to aload irrespective of the valu of load resistance.
2 4761What is the electrical difference between Earthing Switch (ES) and Maintenance Earthing Switch (MES)?
1 3135how we calculate the knee point of a protection and metering CT and what is the testing procedure.
CS,
1 4556HOW WE KNOW IN PHYSICALLY THE CONTACT SURFACE OF A VACUUM INTERRUPTER IS GOOD OR GOING TO DAMAGE IN A VCB AFTER ABOVE 500 TIMES OPERATED.
2055
If there's any possiblity for the Enginnerring graduates, Who had backlogs in there acedmic to get a Good MNC job?
How to decide the size of the capacitor for a single phase induction motor say 2 HP ??
Compare the working principle of gas turbine of capacity more than 10megaW, diesel generator and wind turbine
why in the three pin plug all 3 pins are cutted ?
I HAVE A 50A MCCB AS PER DESIGN LINE WIRE CONNECT UPWORD SIDE AND LOAD IS CONNECTED TO DOWNWARD SIDE TO THE MCCB.IF NOW ANY ONE CHANGE SUPPLY & LOAD(WISEVERSA) WHAT HAPPENS ? DOES MCCB OPERATION OR WORKING FUNCTION NORMAL IF YES THAN WHY THERE ARE MARKED LINE & LOAD ON MCCB.
What is power factor why we should maintain the power factor unless what will happen
What is conductor?
For what ration of Lengh/Dia. of tank (Jacketed tank), maximum heat transfer area is available?
What is the Equivalent for 9.81 kgf= ?
Why a tesa lamp is glow between two phase?
Operation of isolators.
Explain how to convert binary to excess 3 code and vice verse?
How to calculate heat load .For example 10 TR .Then how we will find load (we want rh(relatavie humidity) sir)
what is your experience in developing technical specifications?
in a corner footing of a building, column lies in one corner. in this condition i want to know if the reactive pressure of soil will be uniformly distributed throughout the footing or will be uniformly varying as in the case of eccentrical loading.