Which Machine u will prefer to use at a place where flammable gases are coming

Which Machine u will prefer to use at a place where
flammable gases are coming out & why ?

Question Posted / crmeena

4 Answers
6911 Views
NTPC, I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

Which Machine u will prefer to use at a place where flammable gases are coming out & why ?..

Answer / yuvi

Machines with no comutators, preferably induction motors to
reduce probability of sparking.

Is This Answer Correct ?

19 Yes

1 No

Which Machine u will prefer to use at a place where flammable gases are coming out & why ?..

Answer / avinash n

Flame Proof Machines r prefered at a place where flammable
gases or vapours exists.

Is This Answer Correct ?

1 Yes

0 No

Which Machine u will prefer to use at a place where flammable gases are coming out & why ?..

Answer / saravanan

Brushless motor is used to avoid sparking

Is This Answer Correct ?

0 Yes

0 No

Which Machine u will prefer to use at a place where flammable gases are coming out & why ?..

Answer / ashu sarraf

a machine of tin body on which corbon tetra cloride layeris
coded

Is This Answer Correct ?

0 Yes

4 No

Post New Answer

More Electrical Engineering Interview Questions

i am completed diploma in ece,and working in ht and lt lines.so is elligible diploma in ece for get electrical C Licence?plse give ur opinion?

0 Answers

Three set (each phase contain 2 cable of 400 mmsq CU XLPE AWA) of single core cables are connected to 11 KV motor of 14 MW & the switch gear supplay is taken from 11kv feeder & this supplay taken from 275 KV substation. Problem is one pair cable(L3- 2 cable ) getting very hot & gland melted and damaged in switch gear side. the other two cable haven't any more hot(ambient temp only & L3 haveing 95- 100 Degree C. The same problem happened in 275 KV substation switch gear side also where the supply taken for 11 kv switch gear. But here L2 phese cable had problem. Why it is happening like this?. The cable having temperature different at different location from gland side inthe case of 11KV feeder of 275 kv substation. why ?

2 Answers

What is the working principle of MIG welding? and its out put Voltage?

0 Answers L&T,

How many loops can be provided in a circuit as per IS rules.?

1 Answers

Induction motor & transformer both has magnetic core,then why induction motor is a inductive load & transformer not???

6 Answers SBL,

how hazordious area is classified at an oil & gas plant and categorise suitable class of electric equipment in that area like induction motors, LCS, Lighting Fixtures Fluerescent/Flood lights Mercury& sodium lights, J.Bs, Power Cables etc

2 Answers

.php|

0 Answers Bhel,

how can i find ct ratio of meter by seeing name plate of meter and how it should be used in MF calculation if it shows only-/1???

0 Answers Harshal Electrical,

give me the details of anti pumping relay

2 Answers

In 3phase supply Voltage will come around 370v then what will happen?(mean what will effect on electrical equipment like AC,UPS,Motors.)

1 Answers NTPC,

why transformers rating are in KVA

5 Answers

Briefly describe three methods that are usually used by electricity suppliers to control voltage levels?

0 Answers

For more Electrical Engineering Interview Questions Click Here