how much steel required for 1 sq.m area?
Answers were Sorted based on User's Feedback
Answer / abrar
depending upon the design and thickness of the steel rod
weight can be calculated
Is This Answer Correct ? | 85 Yes | 11 No |
Answer / modipraveen
Hi Generally Per Cum. of concrete 75kg-110kg steel is
required... if you are asking for residential it may require
75 kg per CUM... if you are asking for commercial building
it may reach up-to 110kg per CUM... multiply it by thickness
of slab...
"this is only for slab"
Is This Answer Correct ? | 56 Yes | 16 No |
Answer / sandy
how can be possible that 1 sq mtr slab area required 25 to 30 kg steel
in simple term residential building in slab having a thickness
110 to 125 mm provided Reinforcement generally #8@150 c/c for
distributer bar & #8@200 c/c spacing then calculation says that 5.530+1.825 => 7.355 Kg Per Sq mtr in slab
i also consider this figure may variously According to structure type
Is This Answer Correct ? | 35 Yes | 9 No |
Answer / balamurugan r
As per thumb rule steel requirement per sqft for residential
buildings is 4-4.5Kg/Sqft. So just convert it into sqm. It
will around 40-48Kg/Sqm.
Is This Answer Correct ? | 23 Yes | 8 No |
Answer / rahul
It depends upon the load on that area acting....if the load
is more than more steel will required....and if load is less
than less steel...
(if somebody has more problems for interview..please share
with me...mail me at rahuljainy245@gmail.com)
Is This Answer Correct ? | 10 Yes | 5 No |
Answer / ranganatha.s.p
steel qty depends on type of design and structure. for slab
25kg-30kg
Is This Answer Correct ? | 15 Yes | 10 No |
Answer / rashid khan,bptp ltd
for high rise building,the qnty of steel in superstructure
(incld column,Beam,slab)is about 48.00kg per SQM
Is This Answer Correct ? | 8 Yes | 3 No |
pls tell me about method of cutting length of ties column
how many labour is required for 1cum of concrete?
Can compresive strength test for concrete at 1 day age possible to carry out? If yes, which IS code describes the procedure for such testing?
Aptitude, reasoning, quants, verbal and technical question
What is the coeffiencent Friction Angle between Steel and Ashphalt?
Does degree of bend of rebars has any effect on strength of the member? For example- if a beam is designed with 45 degree bent up bar with respect to architechtural needs and is not 45 in practical so will there be any reduction in the strength of member?
how many kg reinforcement is required for G+ 1 roof slab of 1200qf slop slab with 5 inch thickness of house.
How Much the Lean concrete Density?
0 Answers Techno Unique Infratech,
What the advantages and disadvantage of using 90mm and 100mm bricks for a wall of a house? Thanks for any input.
How much used for sand per square meter in 12mm Thickness
if rise and tread of stairs rae 16 & 25cm with landing slab of thickness 100mm . If there are 8steps, and carpenter ask for to mark the bottom of centering of landing on column, what will be the height above floor finished level?
what is mant by point of conter of fracher(p.c.f)