whatis the test procedure for lightning arrester which was
installed one year back. i want check it whether it is
working or not.
Answer / raghavendran.r
There are two methods of testing the lightning arresters..
1.Power factor test.
2.Infra red test.
Is This Answer Correct ? | 2 Yes | 1 No |
In power transmission using open belts or horizontal shafts it is preferable to have the slack side of the belt on the top because
how to calculate the input current in singel phase and 3phase supply to 5kva ups
how do i calc busbar size for a rated current?
How the electric train gets the supply of electricity? What is the return path of the current?
bit confused - am i correct in thinking that to determine line to line voltage in a star config 110v 3 phase 4 wire distribution system i would use a voltmeter? I have a circuit configured as an unbalanced load, consisting of three incandescent lamps (1x40w, 1x60w, 1x100w - all 110v rated)connected in a star configuration to a 110v 3 phase 4 wire distribution system. I want to find out what types of meters i would use to obtain: a) each line to line voltage b) the line to neutral voltage across each load c) current flowing in each line and load d) current flowing in the neutral conductor e) power supplied to the loads im assuming i would be using ammeters in series along each line and voltmeters in parallel across each line to neutral? Also how could i predict these meter readings before taking them and with which formulae? Any help would be greatly appreciated A.
What should be current in the Primary and secondary side of 1000KVA (11KV Supply)Transformer.?
Why nutral wir used thinner than phase wire
STATE USE OF ARC RUNNERS & SPLITTERS ?
How to select busbar?
why the stator is not laminated in DC machines?
Where the ON LOAD TAP CHANGER is provided in the setp up transformer?
WHY DO VOLTAGE TRANSFORMERS FAIL DURING EARTH FAULT IN THE DELTA CONNECTED 6.6KV ELECTRICAL SYSTEM