Answer / pratheesh

Its all depends upon the capacity of the diesel engine.

There is no fixed numbers of cylinders. Larger diesel
engines should produce more power, so number of
cylinders also more.

Answer / sujit

Its all depends upon the capacity of the diesel engine.

There is no fixed numbers of cylinders. Larger diesel
engines should produce more power, so number of
cylinders also more as well as reduce in lower capacity.
Commnly 6 cylinders are used.

Answer / shakir

it depends upon the power of the genset.
the generators of higher capacities has more pistons as
compared to generators of loweer capacities

there might be 2,3,4,6,8,12,16 cylinders.

Answer / manjunadh

actually its depends upon make of the generator & also capacity of the generator.

how the harmonics are generated in transforemer?

5 Answers   IFFCO,

---

on 22.03.2015 at 17:15hrs Y phase 66kV class Power Trf-2 Current transformer has flashed over and oil came out. The failed CT has been replaced on 24.03.2015 at 13:15hrs and the Trf has been charged in presence of RT Hassan after conducting the pre-commissioning tests. On the same day at 17:00hrs the commissioned CT has again flashed over and immediately the Trf  has been isolated from power supply. It is confirmed the secondary is not opened and checked the earth integrity and is found ok. Here what would be the reason for the CT failure? 

2 Answers  

---

can i know how to design overcurrent setting and earth fault for 11kv & o.433kv system assuming tx 1000kva.

2 Answers  

---

dear friends, how to calculate "Gage" in copper wire , aluminum wire etc. have any formula?

1 Answers  

---

explain how hunting can be reduced in an alternators?

3 Answers  

---

How good are you in resolving the commercial issues to Employer's advantage?

0 Answers  

---

What is the use of Surge Capacitor in LAVT?

1 Answers   Snipe Engineers,

---

What's an AVR? What's its purpose in Generators?

4 Answers  

---

what is voltage rise and voltage drop?

8 Answers   HP, jetking, TCS,

---

what is the reactance,capacitance & impedence electrical armoured & unarmored Cables.

0 Answers  

---

Can anybody just suggest about the scope of Electrical design with ETAP software?Just guide me?

0 Answers  

---

what factor is necessary during design of HT & LT MOTORS.

2 Answers   ABB, L&T,

---