PETROLEUM ENGINEERING - QUESTION 25.1 : Fact 1 : Dry air contains 20.95 % oxygen, 78.09 % nitrogen, 0.93 % argon, 0.039 % carbon dioxide, and small amounts of other gases by volume. Fact 2 : Volume occupied is directly proportional to the number of moles for ideal gases at constant temperature and pressure. Fact 3 : 12.5 moles of pure oxygen is required to completely burn 1 mole of pure octane. Fact 4 : Air-fuel ratio (AFR) is the mass ratio of dry air to fuel present in a combustion process such as in an internal combustion engine or industrial furnace. Fact 5 : Molecular weight of oxygen gas is 31.998 g / mole and molecular weight of nitrogen gas is 28.014 g / mole. (a) Find the molar ratio of nitrogen and oxygen, or (moles of nitrogen) / (moles of oxygen) in dry air, by assuming ideal features of nitrogen and oxygen gases. (b) How many moles of nitrogen are available if dry air is used to completely burn the 1 mole pure octane? (c) Find the mass of fuel of 1 mole of octane with molecular weight of 114.232 g / mole. (d) Find the mass of dry air with 12.5 moles of pure oxygen by assuming only oxygen and nitrogen gases exist in the air. (e) Find the air-fuel ratio (AFR) when octane is used as fuel. (f) Find the fuel-air ratio (FAR) when octane is used as fuel.

1 Answers  

---

In DM plant, If pH in anion outlet is 7.2 and Mixed bed pH is 6.2, wat could be the reason.

8 Answers   Cipla, Jindal,

---

How can you estimate a gas flow based on two pressure measurements?

0 Answers  

---

What is the procedure to estimate the friction factor involved in heat exchanger tubes?

0 Answers  

---

what is the cast iron grade of composition of c-3.06% , Mn- 0.48% , Si-2.38% , S-0.088% , P-0.092% , Cr-0.12% , Ni- 0.012% , Mo-0.00%

0 Answers   L&T,

---

Explain what is the best way to configure a bypass line in slurry services?

0 Answers  

---

Question 112 - In quantum computing, let the amplitude A = a | 0 > + b | 1 >, | a | | a | + | b | | b | = 1. Find the values of b if A = 0.8 | 0 > + b | 1 >.

1 Answers  

---

what is the difference between absorber and scrubbers

4 Answers   Parco,

---

Experiment constitutes 1000 ml of 10 ppm dye solution and 0.2 g catalyst mixed in beaker. How to calculate the initial of concentration?

1 Answers  

---

Why catalyst is charging in chemical reaction as high pressurized pellet of tablet?

2 Answers  

---

Explain the use of gear pumps in motor?

0 Answers  

---

What is are the main terms in Unit Operations? and what is its charecteristics?

8 Answers   HPCL,

---