Answer / daniel tan

The nuisance tripping either for 30mA or 100mA is not so
crucial when Hot water system is concern. With reference to
IEC60479, the RCD/ELCB 30mA or 100mA is not safe to be used
for the Hot water system where it could result to a shock
hazard. As declared by this Standard, a normal human body
can only withstand to a maximum of <7mA. The Residual
Current Device (RCD) leakage protection ranges between
2.5mA~5mA/<50mS should be the correct level of protection
for any Hot water system or Instant water heater appliances
at Home. To prevent any shock hazard, look for RCD can
perform 2.5mA~5mA/<50mS. Let me know if you need help.

How to calculate the current capacity of the 3C / 1C Al/Cu power cable???

2 Answers  

---

How does a television work?

0 Answers   Siemens,

---

Explain Analog and Digital signals?

1 Answers   UOG,

---

What are various impedence in any machine

2 Answers   Engineers India Limited, NTPC,

---

Can we see the poles in the motor?. if yes then how can we see plz tel me

2 Answers   MRF,

---

what is the use of neutral?

14 Answers   IOCL,

---

A 6.6 KV motor breaker is try to Drack OUT by me while the motor running. What will Happened? a, will Trip. b,Drack Out lever will not access c, will get shock d, noting will happened

4 Answers  

---

opkinson's test

0 Answers   Bhel,

---

-What shall be short circuit current of LV switchgear for a 1000 kva, 11.415kv, 3 phase tranformer with 5% reactance.

0 Answers  

---

What is center gravity load in substation?

0 Answers  

---

What are Contactors? How they works and what its highest rating?

0 Answers  

---

What is meant by stator? What is meant by rotor?

0 Answers  

---