Interested to Buy Any Domain ? << Click Here >> for more details...
how to prepare 5 normality of h2so4 solution
- 3 Answers
- 77738 Views
- Symbiotec, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / ashish
H2SO4 MOLECULAR WEIGHT = 98 g/mol
H2SO4 BASISITY = 2
H2SO4 DENSITY = 1.84
SO H2SO4 NORMALITY = 98/2 = 49 g/mol
SO 49/1.84 = 26.63ml
BUT OUR H2SO4 IS 98% SO 100% = 27.17ml
SO 1000ML -------> 1N H2SOH -----> 27.17ML
1000ML -------> 5N H2SO4 -----> (?)
1000 X 5 X 27.17
------------------ = 135.85 ML
1000 X 1
SO TAKE 135.85 ML H2SO4 IN 1000ML WATER
| Is This Answer Correct ? | 166 Yes | 30 No |
Answer / morr
Your stock solution of Sulfuric Acid is calculated to be 35.644 N based on a density of 1.84 g/mL, a formula weight of 98.08 g/mol, and a concentration of 95% w/w.
To make a 5 N solution, slowly add 70.137 mL of your stock solution to 125 mL deionized water.
Adjust the final volume of solution to 500 mL with deionized water.
- See more at: http://www.sigmaaldrich.com/chemistry/stockroom-reagents/learning-center/technical-library/molarity-calculator.html#sthash.gvJRHNFd.dpuf
| Is This Answer Correct ? | 14 Yes | 1 No |
Why are use silicon oil mr?
Why 1.2% KCl is used for limit of stray light? and why limit of stray light is required in UV calibration?
effect of Ph during analytical run ?
1 Answers Lambda Therapeutic Research,
Why Peak Purity is not determined in GC analysis?
how a particular wavelength can be different for a particular compund while analysing by uv and by HPLC.
I have compare C2H2-air and C2H2-N2O flame AAS on determination calcium. Both use same range of std to plot calibration curve. (2-6ppm) When i measure the sample with phosphate, KCl and LaCl, C2H2-N2O flame give false positive result, around 0.5ppm. When i measure the sample with phosphste, KCl and EDTA. C2H2-N2O flame also give 0.5ppm false positive. But both above mentioned sample would not give false positive when measured by C2H2-air flame. What is the reason?
0.1 atom gram of the unknown element( X)reacts with 2.4 gram of O2 to produce the oxid product . can you tell us, what is the oxid formula ? a) XO b)X2O3 c)XO2 D) X2O4
India is. Under which zone as per QF1.?
4 Answers Acebright, Aurobindo, Gland Pharma,
How will u perform degradation study in detectors other thann PDA in HPLC Methodology
in hplc calibration injector linearity pass,it means inj and det is good. why to perform detector linearity is it required, if it is required,what is difference between injector and detector linearity in hplc calibration
What is the solvent/material used to balance spirit level in analytical balance?
5 Answers Glenmark, MMC Health Care,
what are the important specifications for a Column ?
Organic Chemistry 
