Answer / msivakailash85

earth is bypass of lekage current.in any equipment body
earth is important.in case donot done the body
earth,anybody touch the equipment lekage current pass
through body to earth.we get shock sometime cause danger
effect.

Answer / mallikarjuna reddy

in our electrical system body earthing plays vital role.
in our equipments if load unbalance or any leakage current
induces this current flows through the body of the
equipment.so in order to ground this currents we have to
connect the body to earth.

Answer / b.murali dhara babu

The potential equipment body some times rises to higher
value which is some times equal to the system
voltage .It is dangerous to the operating personal of the
equipment . Earthing of the equipment causes the protection
to act and isolates the faulty equipment from service .
Further it minimises the touch potential to the safe
value and helps the operating personal all times from
shocks while operating .

Answer / broader electrical

Let us consider an example of a transformer or a machine. Both system and body are provided with earth protection. Primary function of the body of any machine is to provide housing and support to internal part. If under any circumstances, live part inside of any machine touches the body, the body becomes live (starts carrying current) as it is made up from metal. Under this situation, it is necessary to provide a low resistance path to current and that is completed if body is earthed. If body of machine is not earthed and any human not wearing adequate insulating gloves/pad/shoes comes in contact with the body of the machine, human body will be a path for the flow of current and consequently, the human will be affected by flowing current through his/her body.

what is difference between MCB & MCCB

1 Answers  

---

What is dielectric loss?

0 Answers  

---

Why Stabilising Resistor used in REF circuit ?

0 Answers  

---

After synchronization with grid how to maintain the power factor in lagging or in leading? if lead of lag what is the problem?

3 Answers  

---

function of apfc pannel

3 Answers  

---

Briefly describe your ideal job?

0 Answers   L&T, LPGCL, ONGC,

---

Why front mounted CT polarities are always towards breaker?

0 Answers  

---

do we use links in a dc circuit?if so what s its use in it?

0 Answers  

---

what is the function of choke in the flourcent tube lights and why the colour is in white mostly in flourcent tube lights

0 Answers  

---

how do we calculate of transformer in va?what is calculation?

2 Answers  

---

what is the diference between the 4pole & 6pole DC Motors & what is advantage 6pole over the 4pole ?

0 Answers  

---

Explain the following and how these are working with PLC Unit 1 I/O Module Card 2 Adaptor Card 3 Ribbon Adaptor 4 I/O bus 5 I/O Devices

0 Answers   Mayur,

---