Answer / anurag

It is response of a system when impulse signal is inputed
to the system.

Answer / noor g

impulse response of the system is response of the system
when the input is impulse
impulse response is calculated to look at the behavior of
the system by inserting some other signals which may be a
shifted version of impulse responses

Answer / scientiest

it is the mathamatical function that describe the outpou
wave form when the input is exited by unit impulse.

Answer / vijay lohan

a dyanmic system responce at a signal that point is called
impelse responce

Answer / wattoo

Impulse response is the response of a system to a unit impulse at its input.

Any signal can be considered(approximated) as a stream of impulses (These impulses will be immeasurably close to each other in continuous signals, and will be 1 sample apart for discrete signals). These are not unit impulses. (they have magnitude not necessarily 1). So the response of the system to this impulse should be a scaled form of 'unit impulse response'.

So the output of the system for a certain signal can be considered as the superposition of impulse response due to all the impulses in the input signal. This process of scaling the unit impulse response according to the i/p signal values and adding them all is convolution.

Answer / vijeesh

it is response of the system to impulse and which is entirely depend on system parameters

Answer / manjunath

" it is the inverse laplace tansform of tranfer function H(s)"

Answer / sachida

Impulse response is the response of the system in time domain.

Answer / amitesh ranjan

It is the response of a system when any input signal
multiplied by an impulse function is fed as input and whose
input output relationship (transfer function)is directly
indicated by the laplace transform of input signal.

Answer / vivek sharma

in mathematical term it is response when U(n) is applied ie
value is 1 for n>=0 n zero forn<0

What is effective communication?

0 Answers   Bhel,

what is a state table?

0 Answers  

Explain the structure of entire GSM.

0 Answers   NSN,

What is the difference between ASICs and FPGA devices? Which one is better? Which is being currently in use?

4 Answers  

what is the difference between DVB-S& DVB-S2

0 Answers   DTH,

6. When Abis link is down, name the alarm that is generated at BSC

1 Answers  

what is the operation of logic gates when no input is applied

2 Answers  

. If we have a parallel plate capacitor of plate area 'A' and plate separatoin t and having a capacity C and a metallic plate r of area A and of negligible thickness is introduced in the capacitor at a distance from either of the two plates as shown in the given figure then the capacity of the capacitor will become a.) b.) C c.) 2C d.) 4C

3 Answers   Bhel, BSNL,

why is the threshold voltage of PMOS transistor negative

1 Answers   Reliance,

why number of scanning lines per frame always odd in television?

1 Answers  

plz send me some apts question paper for aricent. thanks in advance

0 Answers  

Discuss any three advantages that digital systems have over analog

4 Answers