What will be the direction of rotation of a Alternator in case it goes in motoring action when connected with grid ?
6 11175There is no such thing as a Generator. All power generating devices are Alternator since both generate alternating current since this is the only way electrical power can be generated. In "generators" the alternating current is converted into DC inside the housing of the "generator" in order to give out DC Do you agree? If not please educate me. How else is DC generated if not like above?
2 3654Why we are using only Dyn11 tranformer in distribution system but not using a Dyn1 in distributing system?why not and advantage and disadvantage in both
2309Why we are testing a tan delta test in transformer? which purpose conduting that test? and time priode test?
1 3169Briefly describe three methods that are usually used by electricity suppliers to control voltage levels?
1577Post New Electrical Engineering Questions
what is the difference between surge protection capacitor and surge arrestor
Give details of your interested designation, the post you are interested to serve the company better and explain why you think you can serve the company better in such position if employed?
What is your acheivements
How I can Compare 120v/60Hz versus 220v/50Hz ? Please tell me both advantage and disadvantage ......
what is the minimum recommended leakage current of an earthed cable connected to the body or skid of an alternator
how we arrange the hv side with delta connection in case 33/11kv of transformer.
What are the common sources of energy?
I want the details about BHEL company examination.Can anyone able to help me please.
If a shunt Dynamo has induced emf 100V and 0.4 ohm resistance and battery of accumulator of open circuit emf 110V and 0.5 Ohm resistance are in parallel what is common terminal potential difference?
Can we use 230VAC, 63A MCB for 120VAC, 63A supplied heaters load?
IN dc capacitive reactance is??
HOW TO DESIGN THE body EARTH cable(Copper Conductor) size for 60KVA UPS?
what r PID controllers?why they r used?what is there purpose?plz Explain in detail
A 100KVA SINGLE PHASE TRANSFORMER 10000/200V,50HZ REQUIRES 300V AT HV SIDE TO CIRCULATE FULL LOAD CURRENT WITH LV SHORT CIRCUITED.THE INTAKE IS 1000W.THE % OF REGULATION ON FULL LOAD AT 0.8 PF LAGGING WILL BE HOW MUCH AND THE SECONDARY TERMINAL VOLTAGE ON 0.8 PF LEADING WILL BE
How to calculate the phase to phase clearness of HT /// LT bus bar?????