Interested to Buy Any Domain ? << Click Here >> for more details...
WHAT IS THE SIGNIFICANCE OF VECTOR GROUPS IN TRANSFORMER? WHAT WILL BE EFFECT WHEN PHASE DISPLACEMENT CHANGES IN TRANSFORMER?WHAT IS THE NEED TO BE PHASE SHIFT CHANGE BETWEEN THE PRIMARY AND SECONDARY WINDING
TCS,
1752Post New Electrical Engineering Questions
WHY TERTIARY OF POWER TRANSFORMERS IS LOADED WITH EQUIPMENTS LIKE CT,PT,ISOLATOR AND CB
what is basic difference betmeen normal & flame proof motor??
The SFC of an engine is 0.25 kg/kW hr. when the fuel used has a calorific value of 36000 kJ/kg. the thermal efficiency of the engine is
When steam condenses and becomes water at the same temperature, the specific heat for the process in kJ/kg k is
what is meant by directional earth fault and non directional earth fault? describe both.
What shall be the secondary output voltage if the primary winding of a 220/6V, 50 Hz transformer is energized by an 110V, 60 Hz supply?
How to calculate Temp from Resister from PT100 equation,
How the frame size of a flange mounted AC induction motor is calculated?
In the N-series schneider reclosers. What is the difference between current during fault time and current at tripping? This appears in the Event log in an event of a trip out.
The power supplied to a 50mH inductor from a 120V, 60Hz source will be
I PURCHASED A DEISEL GENARATOR SET OF AVR TYPE& RATING 125KVA BUT SOME TIMES THE OUTPUT VOLTAGE IS FLUCTUATING WHAT ARE THE PROBABLE REASONS GIVE ME
how point on wave controller works.
State the formula for overall efficiency of thermal power station
63MVA,220KV/6.9KV Transformer LV side neutral is connected to Earth pit through NGR. Whether this earth pit required to connect with near by below grouding earth mat or it is to be kept separate?
Explain in details how you would react to an unexpected incident when your supervisor or manager is not around to give instructions?
