Answer / pragathi

The assembly of apparatus used to change some
characteristics (eg., voltage, ac to dc conversion,
frequency, power factor, switching operation etc.,)of
electric supply is called a sub-station.

Answer / h r jadhav

in power system sub station is playing very vital role for
handeling electrical juise. it is a place where power
transformers or power distribution transformers are
installed and being uesed for transforming one voltage
level into another desired system voltage level of
electrical energy in a energy efficient way.and called as
sub station.

Answer / shoaib9786

when a generating station produces power, the voltage is
around 11kv... This voltage is stepped up to 220kv for
transmission purpose and then at a receiving station it is
stepped down to 66kv and then transmitted to a substation
where the voltage is further droppped to around 6.6kv for
distribution purpose. So a substation is a place where
power is transmitted from receiving station and stepped
down.

hope that answers

Answer / more ajay

A set of equpment the high volyage of electrical transmission for supply to consumer is known as substation..

Answer / arunkumar

A set of equipment reducing the high level voltage of electrical power transmission to that suitable for supply to consumer.

A 500 V shunt motor runs at its normal speed of 250rpm when the armature current is 200A. The resistance of the armature is 0.12 Ω. Calculate the speed when a resistance is inserted in the field reducing the shunt field to 80% of normal value and the armature current is 100A.

0 Answers   VECL,

In a voltage-controlled current source A A current booster is never used B The load is always floated C A stiff current source drives the load D The load current equals Isc

0 Answers  

why secondary of open delta pt (two element pt) centre tap is earth what happen when this earth is removed

1 Answers   Essar,

During speed control of dc shunt motor with flux control methode,when armature voltage is constant, How can it possible to increasing the armature current?

1 Answers  

what is relay

15 Answers   HPCL, IOCL,

can we use ZNyn11 transformer instead of Dyn11 transformer in distribution for effectively eliminating harmonics from the industrial loads.

0 Answers   DEWA,

what is differents between static stablizer and servo stablizer

3 Answers  

Why slip ring ind. motor power consumption is low compare to induction motor .same 90 kw motor used same load output

0 Answers   Altra Power,

Batteries. What is the difference between Lead and Nickel batteries ?

0 Answers  

what is the purpose of neutral grounding resistor (NER) and why?

8 Answers   CBRE, Square Textiles,

Explain cmrr?

0 Answers  

sir, how to select the cable size, what is the parameters use ang what is the formulas use for this cable size calculations. please tell me.

4 Answers   ISRO, Power Grid,