Answer / m.babu

For 11KV and 33KV voltage levels vaccum circuit breakers
are to be used.
For 66KV voltage level SF6 breakers are to be used.

Answer / jyotirmaya patra

For 11KV Vaccum Circuit Breakers(VCB) are suitable to use.
Now-a-days SF6 (Sulphor Hexa Fluoride) breakers are
available but VCBs are economical than SF6 breakers.

For 33KV - both VCB & SF6 breakers can be used,but SF6
breakers are safer than VCBs. VCBs are more economical

For 66KV - SF6 breakers are the best to use

Answer / birinchi narayan boruah

For LT: 415 V
Use ACB (Air blast Circuit Breaker)
For 11KV and 33KV:
Use VCB (Vaccum Circuit Breaker) or SF6 CB (Sulphar Hexa Floride Circuit Breaker).
For 66KV, 132KV and 220KV:
use SF6 Circuit Breaker or Oil Circuit Breaker

Answer / nikhil panchal

Below 15kV AIR CB
22 to 66 kV VCB
115-230 kV SF6
UPTO 765kv ABCB

Answer / nur.asidik

below 36kV, it is better to use VCB, and above 36kV to use SF6

Answer / jegan.j

11kv - vcb (vaccume circuit breaker)
mccb(moulted case circuit breaker)
mcb(maniature circuit breaker)
acb(air circuit breaker)
33kv - sf6
66kv - sf6

Answer / fazil pasha

For 11KV Vaccum Circuit Breakers(VCB) are suitable to use.
Now-a-days SF6 (Sulphor Hexa Fluoride) breakers are
available but VCBs are economical than SF6 breakers.

For 33KV - both VCB & SF6 breakers can be used,but SF6
breakers are safer than VCBs. VCBs are more economical

For 66KV - SF6 breakers are the best to use

Answer / manoj

upto 11kv air break or oil break type.
between 11kv to 66kv mainly oil CB.
between 132kv to 275kv is shared by oil and gas blast CB.
between 400kv and above gas blast(SF6)type.

two parallel conductors are carrying the current in the same direction.which of the following statements is true? (a)there is arepelling force between the conductors (b)the force increases when the distance between the conductors is increased (c)there is an attaracting force between the conductors (d)the force increases when the distance between the conductors is decreased

1 Answers  

Define non-touching loop.

0 Answers  

There are 2 Flip_Flop with logic between them. Given Clock to Q delay, logic prop. delay, set up and hold times specify maximum clock frequency of system. What happens if second output fed back to first input. Any changes? What happens with timing if second output is fed back to logic between the flops? Good Luck!

1 Answers   Qualcomm,

ROC converges if pole and zero lies inside a) origin b) z=1 c) pole d) zero ? Explanation please? if ROC does not converges then?

0 Answers   CCP,

what is the purpose of the armored for the power Or control cable? How to select the type of the armored?

1 Answers   Siemens,

why the insulators are in cofee colour???

4 Answers   Visa Steel,

why we testing the core balance of the transformer before comissioning?

0 Answers  

it is difficult to interrupt a capacitive current because (a)it has a leading power factor (b)current magnitude is very small (c)the restriking voltage can be high (d)stored energy in the capacitor is high

2 Answers   DGVCL Dakshin Gujarat Vij Company, MGVCL, UGVCL Uttar Gujarat Vij Company Ltd,

what is the abbreviation of MIMIC regarding control and relay panels of power systems????

1 Answers   Enercon,

State thevenintheorem?

0 Answers  

what is the differnce between ac and dc?

5 Answers  

can we connect both delta and star to the transformer secondary and for what reason?

5 Answers   Power Grid,