Answer / pillay

The EB gives 11 kw means that is the max load you can put on
EB but you only pay for what you use so ther is no saving
unless you find ways to reduce the 8 kw of the machine.

Answer / wareagle

That is not possible. You maybe saying that the EB is
providing 11 kva and you need 8 kw. If so, then the power
factor of the load is 8/11 = 0.72. You can add 7 kvar of
capacitors to improve the PF to 0.99 an you would reduce
the load to 8 kw.

Why we are designed only 11Kv and 6.6Kv Alternators, not 33Kv Alternators and Power Transmission side we are designed only 220kv, 120kv, 66kv, 33kv, 11kv, and 440volts, not 20kv, 50kv, 100kv.

2 Answers  

---

What is the difference between generator and turbo-generator

5 Answers   iGate,

---

Do Phase angle measurement have any application in freq/harmonics measurement? If so how?

0 Answers  

---

How can remove the jerks on genretor due to remov or connecting the load ?

3 Answers  

---

why earth hole size is biggest in plug point?

22 Answers   Al Qabas, HCL, RRB,

---

Can we parallel two grid with different incoming voltage. Ex.let say one grid is 132kv and another is 220kv.

2 Answers  

---

what is wave trap? please explain the working and principle

4 Answers  

---

WHAT IS THE REASON FOR THE GROUND PIN IS BIGGER IN SIZE COMPARING TO OTHER PINS?

13 Answers  

---

how i calculate the size in mm of the LT 4 core cable for 100 HP inductive motor pump

1 Answers  

---

wat is the difference between real power and reactive power..which is useful..?and how it s useful..wat is the effect of these on a power system...

10 Answers   ABB,

---

int a,b ; a=b=10 ; if(a>b){ printf ("%d",a)}; no error output is a=10

2 Answers   TCS,

---

why the rotor current becomes in steady state during high slip region? please verify with equations.

0 Answers  

---