At 150 degree Celsius, a mixture of 40 wt % Sn and 60 wt % Pb present, forming phases of alpha and beta. Chemical composition of Sn at each phase : CO (overall) : 40 %, CA (alpha) : 11 %, CB (beta) : 99 %. (a) State 2 reasons for the existences of alpha and beta phases for the mixture of Sn – Pb at 150 degree Celsius. (b) By using Lever Rule, calculate the weight fraction of each phase for alpha, WA = Q / (P Q) and beta, WB = P / (P Q) where Q = CB – CO and P = CO – CA.

1 Answers  

---

What are the chemicals are required for cooling tower passivation? Please mail me in my Email id:-nsput2000@gmail.com

3 Answers  

---

What are some guidelines for sizing a psv for a fire scenario on a vessel in a refinery service?

0 Answers  

---

What kind of concerns is associated with temperature pinch points in condensers?

0 Answers  

---

Calculate the line size for a cooling water line with a volumetric flowrate of 1200m3/h of water. Density of water = 1000kg/m3

1 Answers  

---

---

FOOD ENGINEERING - QUESTION 23.2 : (a) A dryer reduces the moisture content of 100 kg of a potato product from 80 % to 10 % moisture. Find the mass of the water removed in such drying process. (b) During the drying process, the air is cooled from 80 °C to 71 °C in passing through the dryer. If the latent heat of vaporization corresponding to a saturation temperature of 71 °C is 2331 kJ / kg for water, find the heat energy required to evaporate the water only. (c) Assume potato enters at 24 °C, which is also the ambient air temperature, and leaves at the same temperature as the exit air. The specific heat of potato is 3.43 kJ / (kg °C). Find the minimum heat energy required to raise the temperature of the potatoes. (d) 250 kg of steam at 70 kPa gauge is used to heat 49,800 cubic metre of air to 80 °C, and the air is cooled to 71 °C in passing through the dryer. If the latent heat of steam at 70 kPa gauge is 2283 kJ / kg, find the heat energy in steam. (e) Calculate the efficiency of the dryer based heat input and output, in drying air. Use the formula (Ti - To) / (Ti - Ta) where Ti is the inlet (high) air temperature into the dryer, To is the outlet air temperature from the dryer, and Ta is the ambient air temperature.

1 Answers  

---

Question 87 - According to Hardy-Weinberg Equation, p x p + 2 x p x q + q x q = 1 where p = dominant allele frequency and q = recessive allele frequency. Let p + q = 1. Fraction of population has 2 copies of the p gene = p x p. Fraction of population has 2 copies of the q gene = q x q. Fraction of population has a copy of p gene and a copy of q gene = 2 x p x q. In a small town, the allele frequency is q = 0.2 for a recessive gene, the delta-32 mutation, that gives human protection from HIV infection. (a) Find the allele frequency a dominant gene, p. (b) What percent of the population has at least a copy of the gene that cause the population either immune to HIV or less susceptible to the disease?

1 Answers  

---

how much height hight work permit requred

2 Answers   Atul, BARC,

---

Question 83 - The United States of America Energy Information Administration reports the following emissions in million metric tons of carbon dioxide in the world for year 2012 : Natural gas : 6799, petroleum : 11695, coal : 13787. Coal-fired electric power generation emits around 2000 pounds of carbon dioxide for every megawatt hour generated, which is almost double the carbon dioxide released by a natural gas-fired electric plant per megawatt hour generated. If 1 metric ton = 1000 kg and 1 pound = 0.4536 kg, estimate the total energy generated by natural gas in the world for year 2012, in gigawatt hour.

1 Answers  

---

Question 43 - In a non-dilute absorber, the inlet gas stream consists of 8 mol % carbon dioxide in nitrogen. By contact with room temperature water at atmospheric pressure, 65 % of the carbon dioxide from a gas stream has been removed. (a) Find the mole ratio of carbon dioxide and nitrogen gases at inlet and outlet gas streams. (b) The Henry’s Law provides y = 1640 x for carbon dioxide in water. Find the mole ratio when x = 0.0000427. Mole ratio is y / (1 - y) for y.

1 Answers  

---

What is an additive?

0 Answers  

---

Are carbon steel storage tanks appropriate for NaOH solutions?

1 Answers  

---