when u are walking on the road, somebody got injured by accident. what is ur immediate action.

13 Answers   HPCL,

---

Question 68 – Biochemical Oxygen Demand (BOD) could be calculated using the formula BOD = (DOi - DOf) (Vb / Vs) where Vb = Volume of bottle in ml, Vs = Volume of sample in ml, DOi = Initial dissolved oxygen in mg / L, DOf = Final dissolved oxygen in mg / L. (a) By using a bottle of Vb = 300 ml with sample Vs = 30 ml, find the BOD if DOi = 8.8 mg / L and DOf = 5.9 mg / L. (b) By using a bottle Vb = 600 mL with sample Vs = 100 mL, find the BOD if DOi = 8.8 mg / L and DOf = 4.2 mg / L. (c) Find the average BOD = [ Answer of (a) Answer of (b) ] / 2. (d) If the BOD-5 test for (a) - (c) is run on a secondary effluent using a nitrification inhibitor, find the nitrogenous BOD (NBOD) = TBOD - CBOD. Let TBOD = 45 mg / L and CBOD = Answer of (c).

1 Answers  

---

Question 48 - Let a ^ 2 = a x a and a ^ 3 = a x a x a where ^ is power function. Niobium is a metal with a body-centered cubic structure. The length of the unit cell structure is b = 0.3349 nm. (a) Find the volume for a unit cell structure for niobium. (b) There are 2 atoms per unit cell structure of niobium. The metal has a molar mass of 92.9 g / mol. One mole of the metal consists of 6.02 x 10 ^ 23 atoms. Find the mass of niobium per unit cell and the density of niobium.

1 Answers  

---

PETROLEUM ENGINEERING - QUESTION 25.2 : (a) The American Petroleum Institute gravity, or API gravity, is a measure of how heavy or light a petroleum liquid is compared to water. Let SG = specific gravity of petroleum liquid, and V = barrels of crude oil per metric ton. Given the formula for API gravity = 141.5 / SG - 131.5 and V = (API gravity + 131.5) / (141.5 x 0.159), find the relationship of SG as a function of V. (b) An oil barrel is about 159 litres. If a cylinder with diameter d = 50 cm and height h = 50 cm is used to contain the oil, find the volume V of the cylinder in the unit of oil barrel by using the formula V = 3.142 x d x h x d / 4. (c) First reference : 1 cubic metre = 6.2898 oil barrels. Second reference : 1 cubic metre = 6.37 oil barrels. What are the 2 factors that cause the difference in such reference data?

1 Answers  

---

What is a "saltation velocity"?

0 Answers  

---

What is the difference between horizontal and vertical heat exchanger?

0 Answers  

---

We are having proplem with the persperation smell in ETT/ECHO room in our cardiac hospital.The 2 Ton of AC is not conditioning the environment. We have to use exhaust fan to through out of the room bad air. Could anyone suggest how to coup with this effectively using chemical engineering. Any permanent solution to neutralise the bad smell.The Air freshners are not doing enough instead making a bad odour.

1 Answers  

---

How to caliculate the boil up rate, dia and height in both packed and tray distillation columns and any referance books for the design.

0 Answers  

---

What is the reason for removing silicon from aluminum?

3 Answers   IOCL, ONGC,

---

Hi.. Me going to tke test for management trainee(technical) Post I am an chemical engineering student . Can u guide how to prepare for this test.Can u send me test paper pattern..?

0 Answers  

---

how does refractive index detector work?

0 Answers  

---

1.How a chlorine leak is detected? 2.What would happen if excess chlorine is added to water in cooling tower?

3 Answers  

---