explain working principle of earth leakage relay
No Answer is Posted For this Question
Be the First to Post Answer
in a refinery one motor is suddenly stoped. what will do how can i findout the problem explain step by step
Clearly Define Active,Reactive,Apparant power.Which applications used which power above metioned power?
what is the wattage of 'zero watt' bulb?
What are the disadvantages of LT AVR over HT AVR?
1 Answers APTransco, Jindal, TNEB Tamil Nadu Electricity Board,
while conducting an experiment why we connect the armature rheostat in maximum position and field rheostat in minimum position
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
why humming sound occured in h HT transmission line
Why are some relay circuts designed to have the ct current flow through the neutral instead of the phase wire, such as in some diff relays?
Why a transformer is rated in kVA and not in kW??
why transformer do not rotate?
ther is any difference if we use 240 V A.C,50 Hz,1 Ph. in place of 230 V A.C,50 Hz,1 Ph.
what will happen power cables laid without gap in underground