Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.

0 Answers   HAL,

---

What are the advantages of speed control using thyrister?

6 Answers  

---

what instruments used for measuring of inductance and capacitance.

2 Answers  

---

X/R ratio in 11kv transmission line is?

1 Answers   RRB,

---

what is the location of lighting switch of battery room

1 Answers  

---

---

Name the types of motors used in vacuum cleaners, phonographic appliances, vending machines,refrigerators, rolling mills, lathes, power factor improvement and cranes.

0 Answers  

---

Why is the frequency not changed during transformation of electrical energy in a transformer?

0 Answers  

---

A resistor,inductor and capacitor are connected in series respectively.Voltage across resistor is 40v,across inductor is 70v,across capacitor is 100v.Then what is the total voltage applied across the elements?

5 Answers  

---

what is transformer tap change HT side and LT side

1 Answers   Alstom, Sodexo,

---

What is reactive power and where it is used.

0 Answers  

---

roles of owslaw explain?

3 Answers   BSNL,

---

what are the effects on an power plant and consumers if the power factor is increased or decreased?

2 Answers  

---