CONTACTORS ARE MADE UP OF WHICH MATERIAL?
Answers were Sorted based on User's Feedback
Answer / brijesh
coil of contactors are made from copper And boddy from
plastic and most impotantly contacts made from sillver
Is This Answer Correct ? | 6 Yes | 0 No |
Answer / shariff
Contactors are made up of bakelite, foil as yoke and copper
as windings.
Is This Answer Correct ? | 10 Yes | 5 No |
Answer / arun kr vidyarthi
coil of contactors are made from copper And boddy from
plastic and most impotantly contacts point made from sillver& Brass
Is This Answer Correct ? | 1 Yes | 0 No |
Answer / hiren
Coil- copper
Casing - bakelite
Contacts - copper with silver plated on the top tip
Some contactors hve inbuilt Aux. contacts
Is This Answer Correct ? | 1 Yes | 1 No |
Is it possible to import & export power through the same power transformer? what will be the vector group normally for both different or same?
why motor burns ?
What is the output of a transformer..??
How can we choose the rating of submersible motors
What will happen if 40W and 60W Bulb is Connected in Series.
can you use 400 volt 3 phase and neutral and earth equipment on 440 3 phase and earth supply safely and if so how?
What is the need of earthing transformer for delta side of a transformer. (Think of a line section between a star/delta transformer at a grid substation and delta/star transformer at a village. An earthing transformer is there at the delta side of the star/delta transformer at grid substation). As there are no ground reference there will not be fault current if a one phase is grounded. Further L-L phase will be sensed by the primary side of star/delta transformer as a L-G fault. So why an earthing transformer is required at delta side
what is function of reactor coil in Power factor correction panel
What will be advantage if we put some load in neutral of grounded star transformer & loadshortcircuit current,rated current of cable & MCB with example?
what is the use of Reactive power in power system?
when we should use Central Battery system and UPS system and why? in other words, what are the differences between the two systems?
What is the difference btwn grounding and earthing?