While DG is on Load? we can start the capacitor bank?

Question Posted / nirav

3 Answers
6019 Views
Inorbit, I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

While DG is on Load? we can start the capacitor bank?..

We can use the capacitor while DG is on load but you should
maintain Lag PF only and any abnormal switching off of the
load means PF will shoot Up and the AVR will fail
immediately.

Is This Answer Correct ?

2 Yes

0 No

While DG is on Load? we can start the capacitor bank?..

Answer / santosh k b

apfc Bank Use compalsary

Is This Answer Correct ?

1 Yes

2 No

While DG is on Load? we can start the capacitor bank?..

Answer / k.prakashchandra

Capacitor bank is usually connected while DG is on load.But
care should be taken to avoid leading pf which causes higher
terminal voltage.

Is This Answer Correct ?

2 Yes

4 No

Post New Answer

More Electrical Engineering Interview Questions

What is main purpose of chock coil and starter in florescent tube ?

1 Answers

what is the difference between elcb and rccb ?

0 Answers Trident,

why in india the voltage generate multiply by 11,,,like 220v,440v,11kv,33kv,66kv,220kv,

3 Answers NTPC, Servotech, Tata Power,

why dc is used in control circuits for MV & LV switchgeras instead of ac

0 Answers

why induction motors are rated at 0.8 power factor.

0 Answers Bhel, TN,

Wheather there exist any dc transformer

6 Answers

I am final year b.tech student..i applied for gate but i am not interested any of my engineering subjects. i am interested in management wise.. is my option correct after b.tech..

1 Answers

Why LVDT have secondary windings connected in differential 1. Higher out put 2. Based on the out put voltage-/+, helps to identify the direction of displacement 3. To establish a null/ reference point

1 Answers GATE, PSPCL,

why grid failure happens?

1 Answers

WE are using a 63A MCCB(SIEMENS MAKE) for one of the feeder in LV substation panel.It is supplying to a lighting & power socket DB.Settings in the MCCB is Ir = 63 * 1 , Isd = 8 times of Ir , tsd = 0.5 sec( I2 t off). Sometimes this MCCB is tripping .But no trip in DB MCB. Can anybody tell me reason ? From where i can know about the MCCB settings?

5 Answers

If one d.g. is unable to take full load of system, then second d.g. will take care of partly Load.for this condition RPM of both DG set should be equal.By using Synchronization panel RPM of dg sets are match, is it true?

1 Answers

why make protection 85% of winding?

1 Answers

For more Electrical Engineering Interview Questions Click Here