The following equipment are installed ia a plant 1. 110KW Induction motor 4 No

The following equipment are installed ia a plant
1. 110KW Induction motor 4 Nos
2. 30 HP motor 3 Nos
3 15 HP Motor 3 Nos
4 7.5 HP motor 4 Nos

what is total load of plant if one of each is stand by.

Question Posted / sharma_vachaspati

3 Answers
5751 Views
Blue Star, I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

The following equipment are installed ia a plant 1. 110KW Induction motor 4 Nos 2. 30 HP motor ..

Answer / k.prakashchandra

For electricty supplier, all are connected loads

Is This Answer Correct ?

2 Yes

0 No

The following equipment are installed ia a plant 1. 110KW Induction motor 4 Nos 2. 30 HP motor ..

Answer / ankit kumar

the total load of plant is 112.94 hp if one of each is stand by.

Is This Answer Correct ?

1 Yes

2 No

The following equipment are installed ia a plant 1. 110KW Induction motor 4 Nos 2. 30 HP motor ..

Answer / vinoth

For Electrical supplier all are connected loads so we shud
consider all the total loads.
1.110kw*4= 440

2.(30*0.75)=22.75*3=68.25

3.(15*0.75)=11.25*3=33.75

4.(7.5*0.75)=5.625*4=22.5

Therfore total in kw=564.5

Is This Answer Correct ?

1 Yes

2 No

Post New Answer

More Electrical Engineering Interview Questions

I have recently seen a transformer which had two primary terminals and was connected between two lines,i would like to know what kind of transformer is it?short discription about it,any advantages,purpose of usage of the same.............

8 Answers

What is neutral earth voltage of transformer and what should be the value

3 Answers

induction 3 phase motor terminal connection

0 Answers

does buccholz in a transformer use batteries

2 Answers

What is SMPS,How does it works?

4 Answers Bharti, TCS,

how to find value of resistance when 1 kw consumption for 10 minutes

1 Answers Manipal Hospital,

we have provided 30 mA rccb to water cooler.but we feel shock in cooler body.what is the reason?

3 Answers FCC,

If I want to lift the water at a height 50m from ground level through two inch(diameter) metal pipe then what is the capacity of motor pump is required? is it possible in single phase supply or not?

0 Answers

what is mean by single phasing used for electrification in rural area of maharashtra ?

1 Answers

What is static frequency control used in gas turbines

1 Answers

wat is the difference between real power and reactive power..which is useful..?and how it s useful..wat is the effect of these on a power system...

10 Answers ABB,

For RCD (Residual current device) Icu is defined. How i can find Ics for them?

0 Answers

For more Electrical Engineering Interview Questions Click Here