Answer / hrithik raj

The fridge with the door left open will run pretty much
continuously to try to cool the inside. Our fridge doesn't
know the door is open, so it keeps running. The thermostat
inside never senses that the inside has cooled, so it tells
the compressor to stay on. The room will be cooled by the
fridge, but remember that the compressor dumps heat out into
the room all the while that it's running. And because the
fridge is not 100% efficient, there will be more heat
generated than there will be cooling. The result? The room
will eventually warm up.
I would disagree partially with the above answer. 1)
Efficiency is a term not really used for refrigerators. The
term coefficient of performance is used because it can be
and usually is greater than one (or greater than 100% in
other words) and equals the heat removed from the inside of
the fridge divided by the work input. 2) Now, if a perfect
fridge was running on a Carnot cycle (no friction in the
parts and other criteria) that gives the most cooling for
the least amount of work, the room would still heat up as
governed by the first law of thermodynamics. W=Heat from the
condenser - heat from the evaporator or W+QL=QH. In this
case all the terms are considered to be positive numbers.
Clearly QH>QL which means the room is getting warmer.
Probably the easiest was to understand this is that work is
going into the insulated room which means the overall energy
and therefore temperature is going up.

Answer / kunal

temperature will increases gradually.

Answer / ashish r zode

it increase the room temp

Answer / anand joshi

Temperature of the room will increase

Answer / gary

TEMPERATURE OF ROOM WIL INCREASE

Answer / dinesh. iiet(student )

room temperature ll gradually increases

Answer / vijay jadhav

The room temperature will gradually increase as for the
first few minutes or may be hours the refrigerator will
work as such but after some time the temp of the room will
increase gradually because of compressor work.And which
will altimately increase the temp of the room.

Answer / adesh sharma

fridge with the door left open will run pretty much
continuously to try to cool the inside. Our fridge doesn't
know the door is open, so it keeps running. The thermostat
inside never senses that the inside has cooled, so it tells
the compressor to stay on. The room will be cooled by the
fridge, but remember that the compressor dumps heat out into
the room all the while that it's running. And because the
fridge is not 100% efficient, there will be more heat
generated than there will be cooling. The result? The room
will eventually warm up.

Answer / pramod kumar

temperature of the room increases ;as source & sink become
same Qh=Ql+Wcomp;

Answer / guest

the room tempreature will be increaded. because the
surrounding temp is observed by the refridgerator. this is
the reason to increase the room temprature

7. What are the different types of conventional and non conventional machining processes

0 Answers   Nucon,

advantage & disadvantage of using lpg in car ?

3 Answers  

What causes crankcase explosion?

0 Answers   RRB,

is pneumatic cylinder can be used as hydraulic cyclider for same pressure.

1 Answers   Bosch Rexroth,

Effect of surface finsh & surface roughness on coefficent of friction in form press tools.

0 Answers  

what amount of heat energy loss in ESP?

1 Answers   BARC,

Why the electric motor of a fan with backward curved blades is never got overloaded under any condition ?

0 Answers  

1. What are good characteristics of good combustion in a boiler? 2. What do you analyze from boiler water analysis? 3. What do you treat in high alkalinity of boiler water? 4. What is a feed water pump? Dearator feed heater? 5. What is the purpose of the nozzle of impulse turbine? 6. What are the things needed to have an efficient boiler burning? 7. Name Of Parts And Each Purpose 8. What are the causes of emergency stop in a steam engine? 9. What is the normal vacuum pressure in a steam turbine atmospheric condenser? What would cause the press to falls? 10. Steam turbine (function an parts) 11. What is the boiling point of water? 12. What are the safety devices of boiler? 13. What is the effect of high alkaline water to a boiler? 14. Steps In starting boilers. 15. Small gear found in the steam turbine. 16. What is an Economizer? 17. What are the methods of heat transfer? 18. Types of pressure 19. What are the different parts of impulse reaction turbine? 20. What is the color of the flame of the boiler running in good condition? 21. What type of pump is commonly used is feed water system in auxiliary boiler? 22. What is the specific heat of water? 23. What do you do to prevent flare black? 24. What is a brake horsepower? 25. What is the purpose of a de-superheater? 26. What is the purpose of corrugated furnaces? 27. What are the causes of steam turbine failure? 28. What is the purpose of superheater? 29. Given a cutaway isometric view of the steam turbine. Examinee was asked to identify the following Parts: 30. What is thrust bearing? 31. Give five boiler mounting valves. 32. In steam boiler, what are the various test in water boiler? 33. How much calorific value of heat is needed to heat 00c of 34. What will happen if boiler backfires? 35. What is the color of flame if the boiler is running in good condition? How about when it is not in good condition? 36. How does the steam work in a steam turbine? 37. What are the causes of boiler backfire and steps in how to prevent it from happening? 38. What are the causes of high alkalinity in boiler water? 39. What are sensible heat, latent heat, and specific heat of water? 40. What are the causes of turbine vibration 41. Identify the parts of steam turbine 42. What is the normal Ph value of boiler water 43. Causes of dilution of lubricating oil in a steam turbine? 44. Explain briefly- good combustion of auxiliary boiler? 45. Method of testing or checking boiler water? 46. What is mean carry over of Aux. Boiler? 47. What are steam turbine parts usually come into damage? 48. Why must we pay attention when we drain steam in steam turbine. What factors are observed? 49. What type of pump use in boiler F.O. system? 50. What parameters to be reported when we send lubricating oil for shore analysis? 51. In boiler, what does steam and smoke goes out to the funnel. What reason? 52. Where can you find the feed check valve and feed stop valve and give the purpose of it? 53. What are the causes of troubles in boiler during operations? 54. Give the purpose of nozzle in impulse turbine? 55. What s gland sealing steam? 56. How to prevent back fire of boiler? 57. What is the used of economizer in boiler? 58. What is the seal packing gland for turbine? 59. What is the flow of steam in an impulse turbine? 60. What will happen if you blow the soot in the boiler? 61. State the purpose of air heater? 62. How to operate soot blower boiler and economizer? 63. What do you mean by A.CC.? 64. What is the thermal efficiency of a diesel engine? 65. What is a blow down valves?

0 Answers   CSPDCL-Chhattisgarh State Power Distribution Company Limited, RRB,

What the significance of "HRC 5O" in Brinell's Hardness number?

1 Answers   Bhel,

what is the basic need for designing the bottle filling machines

0 Answers  

Explain the difference between grey iron and white iron. What is mottled iron ?

0 Answers  

What causes damage to impellers?

1 Answers