Answer / kiran

frequency is defined as number of cycles passes through one
second.
if frequency=0,it is direct current.
if it is for ac,as for our domestic supply we take
50hz,means in one second 50 cycles can pass from one point
to other.

frequency is inversely proportional to time.

so for 50hz, the time taken to pass is 0.02seconds or 20ms.

frequency plays vital role in switched electronics as
depending on its operation, digital bits 1s and 0s can be
determined.

any comments..........

Answer / ghanshyam singh

it ensures change of magnetic field
it produces varying magnetic fields

Answer / sanjay dhuware

simply cycle per second
& mainly imp in electronics & singnals

which element is neglected during fault calculation? a)resistance b)inductance c)capacitance d)reactance

4 Answers  

---

what is the aircraft voltage and frequency standard ?

1 Answers   Jet Airways,

---

I have been using an 600VA with 0.6 p.f UPS with my desktop which has 450W power supply unit. Can anyone explain how can this happen . Because the output of the UPS is 360W (600*0.6) (<450W)

0 Answers  

---

while conducting an experiment why we connect the armature rheostat in maximum position and field rheostat in minimum position

1 Answers  

---

why we use 25 kv in railway .not 11kv, or 33 kv

2 Answers   ISRO,

---

How we can calculate the life of Lead acid battery

0 Answers   ABC,

---

how we will deside the high voltage value

0 Answers  

---

what is resticted earth fault protection ? how did it protect & work in power transformer

3 Answers  

---

a new 3ph induction motor doesn't rotates their ratted speed, why ?

2 Answers   Sail,

---

In the solution of load flow eqation, Newton raphson method is superior to the gauss siedal method because (a)the time taken to perform one iteration in the NR method is less when compared to GS method (b)the number of iterations required in the NR method is more compared to that in the GS method (c)the number of iterations required is dependant on the size of the system in the NR method (d)convergence characteristics of the NR mehod are not affected by the selection of the slack bus

1 Answers  

---

why phase to phase voltage are 290 rather then 440?

1 Answers   Bosch,

---

what sq.mm copper pvc wire need for ac load current 25amps for 230v ?

4 Answers   Khadamat, Siemens,

---