Hoew to represent unilateral tolerance, as Bilateral tolerance in engg drawing...? Example: 1.295 +0.000 and -0.10, as unitolerance, write the value in bilateral tolerance?
1452sir I got selected in rail vikas nigam limited and they call for interview but i don't what they will ask in interview please guide me if you have any experience
1918I want to know the material required per square foot in rcc roof. i.e. steel: kg/foot, cement/foot etc.
TVO,
1513Question - Chemical Engineering Material - In crystal material, hexagonal crystal system could form 4-digit index in certain direction of solid. For [1(-1)0] direction in the hexagonal crystal systems of particular catalyst applied in fume removal of incinerator, what is the four-digit index for this direction? Hint : The transformation equations between the 3-digit [h’k’l’] and the 4-digit [hkil] indices are : h = (1/3) (2h’ – k’); i = - (h + k); k = (1/3) (2k’ – h’); l = l’. A. [(-1)100] B. [1(-1)00] C. [(-1)000] D. [00(-1)(-1)] E. [(-1)0(-1)0]
1 1713Chemical Engineering Unit Operation - Which of the sequence below represent a feasible flows of ethanol processing plants using cellulose as starting material? A. raw material --> heat exchanger --> distillation column --> reactor. B. reactor --> distillation column --> raw material --> heat exchanger. C. heat exchanger --> raw material --> distillation column --> reactor. D. raw material --> heat exchanger --> reactor --> distillation column. E. distillation column --> raw material --> reactor --> heat exchanger.
1 1836
Write the total description of Ultra Commissioning.
Describe The Complete actvities of the STORE KEEPER?
For the construction project what capital cost has to be taken in consideration?
I need to know steps to Calibration Valve Guard......
Which tank weighing system is better to install (Accuracy point of view) 1) Tank weighing system with 3 load cell or 2) Tank weighing system with 4 Load cell
distance between the power generation and the distribution to the application is fixed or vary
Hi l, I want to install a water purifier (UV) at my home. the distance of water purifier from water tank [1000 lt ] is 7 ft. Is it sufficient for electrical water purifier? I want to know what is the water pressure from 1000 lt tank (the pipe used from water tank to machine is of inch 1-1/4") please note minimum water pressure is required for UV is - Water Pressure Min: 0.4 kg/sq. cm.Max: 2.0 kg/sq. cm. Please advise me on the following: 1) What is the water pressure generate in above condition. 2) What is the required height from the UV machine to water tank for the above condition? Thanks is advance.
what is isloted barrier how it works and what are the main purpose.how it make safe area.
Meter p.t. ratio= 3×230/400 , c.t.ratio = 3×1 (2) A what is m.f.
Vibromotor 252MV 1/4HP2P..what is mean by 252MV?
What is hp & mp seperator .& what is its working principle ?
Explain what are some good uses of low-grade steam at 12 atm and 1920c?
formula for convert liter in to pale
What products have you designed which have entered high volume production?
Installation resistance for whole installation of 16 kva & 25 KVA DTRA a) Between each conductor b) between conductor to earth c) installation resistance for each apparatus, each conductor to earth d) earth resistance for the system of earthing