Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379) WHY THE RATINGS OF THE TRANSFORMER IS 33KV WHY NOT OTHER???
HOW TO CALCULATE THE REGULATION OF 100 AND 25 KVA TRANSFORMER
What is meant by scaffolding coefficient?
for under water excavation works, can i have some standard codes and specifications(international)
Which metal is the best conductor of heat?
what happen if i increase height of displacer type LT.accuracy or sensitivity are affected.why?
How to manufacture the cmos inverter?
Hi; May you please tell me that There are any best institute or training center in north India region like as Delhi NCR for Protocol stack development & testing, which are better for experienced & professional engg.
why orfice is not used for main steam flow calculation
pls suggest suitable MOC of diaphragm for pressure measurement of UREA grade solution service fluid.
Which device produces voltage variable capacitor?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
A code which had some declarations of some data items. There were a couple of normal data items(char,int..) and some pointers as well and a malloc call. You have to find the total memory taken up in the stack(Hint:Pointers and all are allocated in heap, not in stack, so dont count them).Also in most of these questions, they were specifying that the OS was 32 bit
Is it acceptable of installing an earth pit in planters area where bare copper cable, earth rod and connection are susceptible to corrosion due to water?
What are the different sign conventions used in electric circuits?