Interested to Buy Any Domain ? << Click Here >> for more details...
-
Civil Engineering (5086) - Mechanical Engineering (4456)
- Electrical Engineering (16639)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
what is the need to express current and voltage in rms value? rms value is also called as effective value,what is effective value?
Bhel,
1975How much width of the land shall have to be left below the EHT line of 440 kv as per the rule. i am told that a corridor of 35 M width is to be left free below 220 kv line. please confirm
1 3372if we have a industrial load of 400 kilowatts with 415 volt AC then how much total harmonic distortion (thd%) should be acceptable for steady power system.
1984
How you can use different dimension tools in cad? What are the different dimensions available?
HOW MUCH HARDNESS OF CAST IRON?
Why synchronous motor is used in power factor improvement,dc series in lift
why electronic instruments is more favorable than electrical?
what is an inverting amplifier?
What applicable rate of wct in bihar
what a function diesel generetaor turbo charger & turbo charger is more heated explain reason ?
please provide me the calculation for the thickness of duplex stainless steel pipeline thickness used in process industry ( Water). The details are given below. Diameter : 3" and 4" Thickness : 3.91mm, SCH40 Operating pressure : 62 bar Operating Temp : 35 degree ASME31.3
What is demodulation?
what is the advantage of submersible level transmitter compare to ultrasonic level transmitter?
What is gain margin?
how a choke of tubelight can be used to increse reciving power of antina?
Why in power plant projects we see DOL starting method used for motors upto 160 kW instead of star delta method
# What is D-FF? # What is the basic difference between Latches and Flip flops? # What is a multiplexer? # How can you convert an SR Flip-flop to a JK Flip-flop? # How can you convert an JK Flip-flop to a D Flip-flop? # What is Race-around problem? How can you rectify it?
What is the function of solenoid valve in on/off & shutdown valve and why it is not used in control valve normally?
