Interested to Buy Any Domain ? << Click Here >> for more details...
-
Civil Engineering (5086) - Mechanical Engineering (4456)
- Electrical Engineering (16639)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
1mv pure sinesoidal input given to high current carrying op amp.is it possible to get 10kv output
2 4577pls suggest suitable MOC of diaphragm for pressure measurement of UREA grade solution service fluid.
3131motor work in hat principle generator work in what principle transformer work in what principle pls explain with details or answered to ramadoss.sepc@gmail.com
1 3690a wire in which bulb is connected there is two terminal when one terminal is connected to phase than why the value of current shock in nutral terminal is max. or large??
4 5708If the neutral wire go pass through the core balance current transformer? If yes then why? and no then why?
2 11725why 3phase is 440v but where as we get phase voltage 220v,we have to get 220*3=660v.can u pleas give in detailed
3 10453374kvar capacitor bank connected across 600kw,6.6kv motor.what will happen if motor run at 50% , whether full kvar applied or half?
NTPC,
1 43691.what is controller proportional gain 2.what is the controller intergral action time. 3.A proportional plus derivative controller that has a proportional band of 20% and a derivative action time of 0.1 minutes. Construct the shape of the output waveform for the triangular input if the input rises and falls at the rate of 4 units per minute.
2687
What is back compressor in engines?
What is vane diagram in centrifugal pump?
Is there any junction in conductor?
What is the condition to be satisfied in the selection of l and c in a series inverter?
How to calculate no of Lighning arrestors are required for protecting 50mX 50m*20m cubical building and locations of LA?
what would be the design load of R.C.C Cooling tower per cell.?
State and define norton’s theorem?
Why use in ht motore
how control valve works? process line pressure is 50kg/cm2g and instrument air pressure is about 4 kg/cm2g.
Is the installation of the filter cloths necessary before spreading the gravels at the transformer yards?
Define white metals.
in single phase converter, the no.of scr's conducting during overlap a)1 b)2 c)3 d)4
What is the effect of temperature on the reverse current of a p-n junction?
Full form of KKS when use DCS.
Please send BSNL TTA Question Answer
