Why do the Gamma Prime and Gamma Double Prime phases play
such an important role in promoting strength in the
superalloys?
Answer / arun s. watwe
Gamma prime and gamma double prime phases are Ni3Al and
Ni3Nb in composition, respectively. These have strength
much higher than the superalloy matrix and ductility
comparable to that of the matrix. As such, these afford one
ways to have a wide range of amounts (10-70 % by volume)and
tehreby property ranges using relatively inexpensive
alloying additions. Just as important are their ability to
retain their strength upto high temperatures and to
precipitate in extremely fine sizes uniformly throughout
the matrix.
| Is This Answer Correct ? | 3 Yes | 0 No |
What are the compositions of brass, how can this metal be heat-treated, what is the melting point of this metal?
Define what is the melting point of e70 steel, 304,308,316 stainless steels? In addition, define what is the hottest part of the flame in a fire?
A plain carbon steel contains 45 wt% of proeutectoid ferrite. What is its average carbon content in weight percent? I know that you need to use a tie line in the phasediagram, but my book does not really give a good example to go by?
In grey iron sulpher was above 0.15% what react on metal?
Is there a possibility of inducing stress cracking in an insulated stainless road tanker vessel (20 tonne capacity) if the vessel is subject to rapid filling (10 tonne /hr) with liquid methane (-160 c) assuming the vessel is at ambient. If so, where could I obtain suggested cooling rates?
What is duplex and super duplex steel?
carbon-3.23%,manganese-0.60%,silicon-2.25%,sulphur-0.086%, phosphorus-0.122%,chromium-0.04%,nickel-0.10%,molybdenum- trace.
What is the help of crowning on pulleys
Why do the Gamma Prime and Gamma Double Prime phases play such an important role in promoting strength in the superalloys?
Define what is special about the properties of chromium molybdenum steels that make them ideal for pressure vessels?
i want to go to US for Bachlore of computer science, I didn't appeared for SAT. my ielts scores are too low only 5.5 band and I am confused if VISA OFFICERS will ask why u hadn't given SAT. what i have to answer pl suggest?
carbon-3.23%,manganese-0.60%,silicon-2.25%,sulphur-0.086% phosphorus-0.122%,chromium-0.04%,nickel-0.10%, molybdenum-trace. WHAT IS THE GRADE OF THIS CAST IORN.
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)