plz send the interview questions in the written test asked by hindustan petroleum corporation ltd.Iam a b>tech in chemical engineering.My written test is on feb 2008.urgent plz.send the questions to avazithraja@rediffmail.com

9 Answers   AZTEC, Bapex, HPCL,

---

Question 38 - The terminal velocity of a falling object, v is given by v = sqrt [ 4g (R - r) D / (3Cr) ] where sqrt is the square root of, g = 9.81, D = 0.000208, R = 1800, r = 994.6, m = 0.000893. The Reynold number, L is given by L = rD (v) / m. The C for various conditions are : C = 24 / L for L < 0.1; C = 24 (1 + 0.14 L^0.7) / L for 0.1 <= L <= 1000; C = 0.44 for 1000 < L <= 350000; C = 0.19 - 80000 / L for 350000 < L. Find the value of v for the situation above by trial and error, ^ is power, <= is less than or equal to.

1 Answers  

---

A cantilever beam of length L = 3 m carries a uniformly distributed load (UDL) of W = 20 N / m throughout the length. Calculate the bending moment, BM of the beam near the fixed end. What is the shear force, SF at this point? Let SF = -WL, BM = -LWL/2.

1 Answers  

---

Question 69 - A well delivers 225 US-gallons per minute of water to a chemical plant during normal system operation. (a) Calculate its flowrate in the unit of mega US-gallon per day or MGD. (b) The following formula is written next to the chlorine feed point : (chlorine feed rate, lb / day) = (flowrate, MGD) X (dose, mg / L) x (8.34). If this formula is correct, then what should the chlorine feed rate to be in pounds per day (lb / day) if the desired dose is 2 mg / L. (c) Prove by calculations that the constant 8.34 in the formula next to the chlorine feed point is correct. Let 1 US-gallon = 3.78541 L and 1 mg = 0.0000022046 pound.

1 Answers  

---

How to calculate the sonic velocity of a gas stream?

1 Answers   Sony,

---

---

Explain how can you quickly estimate the horsepower of a pump?

0 Answers  

---

what is the differance between Horizental and vertical heat exchanger?

11 Answers   Bihar Caustic and Chemicals,

---

pls send me HPCL & reliance test paper for chemical engineering.....

4 Answers   BCPL, HPCL, NOCL, Reliance,

---

Need to design filter...Length and diamter of shell

1 Answers  

---

hi im appering for the written test of vizag steel plant for MT-2009.plz send me the pattern of placement paper plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

1 Answers  

---

why rotameter has variable area?? is it necessary??

1 Answers  

---

What is microstir?

1 Answers  

---