Answer / Mahendra Pratap

To calculate the elongation percentage of a material like aluminum, you would typically perform a tensile test and measure the gauge length (initial length) and the final length after deformation. The elongation is calculated as the increase in gauge length divided by the original gauge length, multiplied by 100. However, without knowing the initial gauge length, it's not possible to determine the elongation using only the final diameter.

What are the protective devices in a DC/AC motor starter?

1 Answers   CTS,

---

why there is a temperature rise at different metal to metal contact at cable lug??suppose cable is aluminium and the lug is copper,than why the temperature rise takes place??

2 Answers   JK Cement,

---

33kv Rated output avilable in market (any where in india)

1 Answers   C2C,

---

What are the different types of LT Cables?

1 Answers   Nabard,

---

i have 2kv ups how many watts batteries is required

2 Answers  

---

Do power transformers have an Automatic Voltage Regulator (AVR) just like the alternator/generator in a power system?

4 Answers  

---

What is load boxes ?

1 Answers   AMIE, PEPL,

---

what is difference between ac1 and ac3 contactor and why it is needed to be selected?

1 Answers  

---

which seven wonders are selected in india in 2008-2009

2 Answers  

---

when we r using single phase load and we have power cable of 3.5core with .5 of neutral and neutral is suppose to the returen path of the phase how much current will flow in the neutral.reply.

2 Answers  

---

What are the classifications of heating element?

1 Answers   BARC,

---

A separately excited dc motor having 2 ohm armature resistsance draws a current of 10A and torque developed is 20 Nm under rated field condtion. the speed of the motor under the rated field condtion , when it is connected to a 100V DC source and delivering 10Nm torque....

2 Answers   DRDO,

---