_____hamari_____tumhari____ne dil ki_____utari. _____ne ____ dekha ashe ___ doshti ko lage na hamari.Complete pajal1 1981
how we calculate electricity unit ( meter unit.. for knowing how many charges) from on motor load.?2 1332
Relation between pyramids and electrical technology?1 1145
What is SFU why it is used1 1372
what is the name of the oil is used in transformer?5 2722
What is shunt voltage and u v voltage witch one best
A 10 MVA, 66KV, 50Hz, Y-connected 3-phase alternator has synchronous reactance of 0.635 Ù. It is working at full load at 0.8 lagging p.f. condition. Find torque angle, neglect armature resistance.
With a phasor diagram show the effect of increasing the field current of a generator supplying a constant real power and connected to a grid system.
Draw the wave shape of armature current in a generator subjected to a sudden three phase short- circuit at its terminals. Define various reactance of generator from this wave shape.
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
A generating system will have a total capacity of 300 MW. Find the probable forced outage when the capacity is supplied by two 150 MW units. The operating probability of all units is P=0.98 and forced outage probability rate Q =0.02 .1341
I have 4 busbar of 1000 ampere. we use 4 busbar to make 4000 ampere in one phase.my problem is that when we applied 60% load on that then busbar produced high noise.what is the reason of that and how can i minimize that noise.
1.dg on load alarm/stop alarm... 2.dg on load. piu alarm alarm kaise chek krte hai
ITI r/tv trade APPLY (J.T.O VACANCEY) ALSO INCLUD AITT ELECTRONIC,WRITEEN XAM DONE 23.03.10 BUT NO RESPONCE WHY ANATHER ID email@example.com
What is installed in PAC that is control the humidity
what is method for testing CT
Mention the disadvantages of low power factor?
What is the meaning of loop in transformer
Define end float in a motor?
Please define ohm’s law for a.c (alternating current)?
Can the output voltage of a rectifier be greater than the input AC voltage without the use of any voltage multiplier in the circuit??please provide the explanation too..
I have two PLC processors. I want to communicate both processor with each other. How i can do so?
What is a differential amplifier? Also, explain cmrr.
wHAT IS CAPACITANCE LATCHING? hOW TO CALCULATE CAPACITANCE LATCHING? hOW TO SOLVE THE PROBLEM IF CAPACITANCE LATCHING APPLIED?
Why does curving the pole faces in a dc machine contributes to a smoother dc output voltage from it?
What are the types of the glands and difference between single and double compression type of cable Glands.