Civil Engineering Interview Questions

Questions
Answers
Views
Company
eMail

how many re use can use shutting material. timber ? ply? steel? plastic? fibre? aluminium? Doka?

1009Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700

L&T,

625How good are the Weinerberger Porotherm bricks that are being used in construction in Chennai, India. Its being used in non load bearing walls and has a compressive strength greater that 35 kg/cm^2 and a density of approx.694 - 783 kg/m3.

546Post New Civil Engineering Questions

Un-Answered Questions { Civil Engineering }

for 200 kg of cement how is the mix proportion in kg for m25 grade of concrete

what is the list of building construction equipment & teir output?

what should be RCC material i.e iron rod(mm)x cement x stone x sand for laying of slab L 42'x B 22'x tk 0.375ft = 1nos & column of H 17'x15"x8" 2nos.

why steel tanks are provided (a) for water pressure (b) for wind pressure (c) for earthquake pressure

WAP to print 1) 1 1 1 1 1 1 1 1 1 1 2) 1 2 3 4 5 6 7 8 9 10

in the earthquqke the profile of water on dam is parabolic or not

brickwork labour rate per cum ?

in block masonry l=10',b=0.5',H=10',Calculate cement ,sand and no.Of blocks?

pls tell estimate for 1 kilometre length random rubble masonry 0.90 metre height 0.600 metre width

100mm block work 64 bags of cement used 150mm block work 286 bags of cement used 200mm block work 20 bags of cement used patly work (M15) 293 bags of cement used mortar ratio is 1:5 how to calculate volume of sand in cum & no. of bags

what is yield and tensile strength of steel, if steel has yeilding strength of 60 psi than how much its tensile strength?

In a beam,stirrups are placed closely at ends than at centre due to shear.similarly where would ties be closer to each other-at center or at ends in a column and slab.

what is spacing of wallar support of 3m column. the thickness of column is 0.25 m.

Exterior Joints,define

What is the use of water table & Kreb stone for drain