features of hbc fuses
No Answer is Posted For this Question
Be the First to Post Answer
Two 11 kv lines are feeding to common bus in a substation,I have one set of CT & PT(3ct,2pt), How can I measure both lines power using single set.
what is feed back and what are feed back amplifiers?
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
generally in LT and MV motors we are using 3.5Coresx16,25,35,50 etc cable for supply.although motors is earthed at two point and having all protection.then why we are using that 1/2 core for earthing the motors.while in HT cable we are using only 3core cable for motor supply.generally lt and mv motors are delta connected and ht motors having star connection.whethere it is having any relation with winding connection( star or delta).all motors i am talking about are dol only.can anybody solve my confusion.thanks...
what is units of resistance
specific gravity of a battery?
in three pin pluge there three pins one is phase and second is earth third is nutral why nutral high diameter compare with phase and earth
if we put a energy meter in 500 kvar capacitor bank ,then how much units show in energy meter per day.
How to caluculate number of batteries to connect a three phase ups by KVA?
what is the difference in between short time and continuous rating?
why we create vaccume in transformer tank before oil filteration?
How do we calculate the Out put voltage of generator, after the excitation is being given?