What are the superalloys used for?

2 Answers  

---

The requirement for ASTM A217 Gr. WC9 castings for valves components like Body and Bonnet were Normalising at 920+/- 20 Deg. C and Tempring 780+/- 20 Deg. C The specification calls furnace shall be calibtated within +/-14 deg. C The Heat Chart shows minimum temperature for normalising 900 to 920 Deg. C, but maximum temperature 960-990 Deg. C Tempering 780+/-20 Deg. C is within limits and accepted. Casting having integral test bars, heat trated along with castings passed in chemical znalysis and mechanical properties. Since normalising maximum temperature is not meeting specification, where castings can be salvaged or renormalised and retempered to meet specification. Whether it will have affect on remechanical properties testing

0 Answers   Leader Valves,

---

I currently use 17-7 PH stainless which is hardened to condition CH after forming. raw matl is .1.75"X .12" X .008". Its main usage after hardening is silicon wafer retainer where it's contantly cycled up and down to putin and remove wafer after 40-60 sec process at 400C temp. At this high temperature this part seemed to deform after a a couple of hundred wafer which is what it was designed for in the first place. THere is a proposal to go to a different material to increase lifeline of this part. My question is..... can 321 SST be a plugin replacement. I know this has a higher temp rating but how about its forming characteristics, will it have spring properties, and wont become brittle after prolonged exposure to 400C.

0 Answers   Novellus,

---

Which material is used to made up of electrodes of resistance welding?

0 Answers   NIC,

---

what kind of cleaning substance or treatments keep or help prevent cast iron from rusting?

0 Answers  

---

---

Why is chromium molybdenum steels used to build pressure vessels?

0 Answers  

---

Give example of heterogeneous systems.

0 Answers   Essar,

---

Is there a possibility of inducing stress cracking in an insulated stainless road tanker vessel (20 tonne capacity) if the vessel is subject to rapid filling (10 tonne /hr) with liquid methane (-160 c) assuming the vessel is at ambient. If so, where could I obtain suggested cooling rates?

0 Answers  

---

Why is steel vital in the construction of an aircraft?

0 Answers  

---

Explain the uses of iron ferrite?

0 Answers  

---

What are ceramics?

0 Answers  

---

Define what is the difference between plaster used in gold investment casting and ceramic used in the process of investment casting of automobile engine parts and turbine blades etc. When both are used in the lost-wax method?

0 Answers  

---