I work on a electronic positioner transmitter 4211 at the field.I connect my multimeter in series to get the current output then I calibrate it to 4ma in 0% of position of the valve and 20ma in 100% position of the valve.My problem is in the field I get the correct output current based on my multimeter but in the dcs they only receive 40% in a output 20ma of this positioner.Then I try to simulate in this analog card and they receive the equivalent percent on the value that I simulated.Is ther any possibility to reset the zero and span of this positioner 4211 fisher.And what other possibility I can do to fixed this.This is my email add ( landicho_randy@yahoo.com )

4 Answers  

---

Why we use 3-15 psi air for control valve input?

2 Answers  

---

how can i communicate with non-national instruments device with pc via labVIEW8.2

3 Answers   Google, Mico, National Instruments,

---

Why 4-20 amps is being used in instruments? Why cant we use any other range instead of 4-20 amps? Why only 4 amps is taken as lower limit and why 20 amps is taken as the higher limit?

0 Answers  

---

Regarding , there is an air cooler which control the fans(50% of AV FANS) by temperature in outlet , and the louver of Air cooler is controlled by HIC from control system , So if on Air cooler we will consider 2 individual I/P converter or positioner?

0 Answers   Chagalesh Consulting Engineers,

---

how many types of sensor in instrumentation

3 Answers   SRACO,

---

What is diffrence between Transducer and Transmitter?

13 Answers   Ford,

---

IF PLC POWER FAILURE THEN WHAT HAPPEN?

2 Answers   IFFCO,

---

what do you mean by cathodic protection?

1 Answers   Saipem,

---

What is Cu-100 and Cu-1000 ? and tell me its application ?

2 Answers  

---

Why boiler chimney area  oxyden sensor fixing? 

0 Answers   NTPC,

---

suppose, after calibrating a transmitter we fixed it in a process line. At live zero condition the Tx shows 4.5 mA. what should we do to make the Tx show 4 mA? If we adjust zero, will it not affect the calibration?

4 Answers   ABG Shipyard,

---