What is a common failure mechanism for above ground atmospheric storage tanks?
No Answer is Posted For this Question
Be the First to Post Answer
ENGINEERING MATERIAL - EXAMPLE 12.2 : At 150 degree Celsius, a mixture of 40 wt % Sn and 60 wt % Pb present, forming phases of alpha and beta. Chemical composition of Sn at each phase : CO (overall) : 40 %, CA (alpha) : 11 %, CB (beta) : 99 %. (a) State 2 reasons for the existences of alpha and beta phases for the mixture of Sn - Pb at 150 degree Celsius. (b) By using Lever Rule, calculate the weight fraction of each phase for alpha, WA = Q / (P + Q) and beta, WB = P / (P + Q) where Q = CB - CO and P = CO - CA.
At what temperature is glass fused to steel in the making of glass-lined equipment?
which chemical reaction has the maximum evolution of heat?
Explain why is post-weld heat treatment (stress relieving) sometimes necessary for welded vessels?
What are demand of crotonaldehyde99% in the worldand its international market ?
what are the chemicals used in PFR and MFR to Process?
why do tangential entry require for a cyclone separator?
What types of metals are typically removed via chemical precipitation?
ELECTRICAL TECHNOLOGY - EXAMPLE 16.1 : According to Shockley equation, the I - V characteristic of a diode is approximated by I = IS [ exp (nVD / VT) - 1 ]. For silicon, let the reverse bias saturation current IS as 0.000000000001. If n is ideality factor with value of 1.5, VT as thermal voltage drop of 0.026 V at room temperature, what is the value of current I that passes through the silicon diode in the heater of evaporator when the forward voltage drop VD = 0.026 V? Please take note that exp is the exponential function with e(1) = 2.718, e(2) = 7.389.
ENGINEERING DRAWING - EXAMPLE 18.1 : For a Vernier scale of representative fraction (RF) = 1 / 25, calculate the length of the scale for the reading up to 4 metres.
A cylinder having water is being evacuated with constant rate. what is the relation between pressure which is existing in cylinder with time? (P and t relation)
I am currently doing my btech in computer science in Coimbatore.I had intererest to do btech in chemical enginerring but couldnt get a seat. Now what are my options ,scope and future if i take mtech in chemical enginerring? And can i apply for any deemed colleges for mtech chemical enginerring through gate taking my present state into consideration(btech in cse and mtech in chemical enginerring)
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)