Answer / sagar sanjay ahire

Basic of instrumentation and electronics tools

Corona occurs more in winter or rain?

1 Answers   UPPCL,

---

why water first pass to sac then sba

1 Answers   ACC,

---

i want to design tap changer for 15kv to 0.4kv steepdown transformer then how can i calculate tap number required

0 Answers  

---

In an existing power plant (phase I) with step up transformers (3nos) with Ynd1 vector group to the 400KV bus bar,an extension power plant (phase II) with transformers (4nos) with Ynd11 vector group >. what are the consequences of such configuration ,please note that % impedance are also differ i.e. 15% & 10.5% the reason was that auxiliary supply interface is at different voltage levels i.e 400v & 6.6KV in phase i and phase II respectively .please advise ! Thank you !

1 Answers  

---

I want model ofs interview question paper

0 Answers   OFS,

---

how we can calculate the load appeared on programable logic controller.and what is the method to calculate the scan time of PLC.

0 Answers   Siemens,

---

difference between gauges and comparator

0 Answers  

---

what is the work of commutator and brush in motor

0 Answers  

---

main() { char input[] = "SSSWILTECH111"; int i, c; for ( i=2; (c=input[i])!=''; i++) { switch(c) { case 'a': putchar ('i'); continue; case '1': break; case 1: while (( c = input[++i]) != '1' && c!= ''); case 'E': case 'L': continue; default: putchar(c);continue; } putchar(' '); } putchar(' '); }

1 Answers   Vector,

---

why we use transformers?

0 Answers  

---

Basic questions asked in HPCL(instrumentation) in refinery section

1 Answers   HPCL,

---

zeroth law of thermodynamics

0 Answers  

---