Answer / kang chuen tat (malaysia - pen

Answer 10 - Volume of crude oil sold in US = 42 x 42 (US gallons) / 0.15898 (cubic metres) x 0.163659 (cubic metres) / 36 (Imperial gallons) = 50.4421 US gallons. The answer is given by Kang Chuen Tat; PO Box 6263, Dandenong, Victoria VIC 3175, Australia; SMS +61405421706; chuentat@hotmail.com; http://kangchuentat.wordpress.com.

Explain what are the design considerations for a piping system for the transfer of slurries?

0 Answers  

---

Can asphalt be recycled to form a useful product?

0 Answers  

---

why PH scale range is 14? why it is not less or not greater than 14? solution of HCl or hydrogen containing liquid has a PH. but if the solution is KMnO4 here not hydrogen power does it PH? explain plz....

1 Answers  

---

What are the criteria’s involved in choosing mass balances for components?

0 Answers  

---

Define a solvent?

0 Answers  

---

---

X is a solid having a white colour at room temperature. It has a density about 2g/cc. Although it has melting point near 325 degree Celsius, its properties start degrading above 260 degree Celsius. The coefficient of friction is very low about 0.1. It has very good dielectric properties especially at higher radio frequencies. It has a very high bulk resistivity. It is chemically inert. It is also resistant to van der Waals force. It is hydrophobic as well as lipophobic. Creep or ‘Cold Flow’ has been observed in X.

0 Answers   Ford,

---

In gas and water who's density is greater and why?

5 Answers  

---

What is the wet bulb globe temperature?

0 Answers  

---

Need to design filter...Length and diamter of shell

1 Answers  

---

Explain what are some common precipitating agents used to remove metals from aqueous waste streams?

0 Answers  

---

CHEMICAL FLUID MECHANIC - EXAMPLE 3.1 : Water flows through a pipe with circular cross sectional area at the rate of V / t = 80 L / s where V is the volume and t is time. Let Av = 80 L / s where A is cross sectional area and v is velocity of fluid. For point 1, the radius of the pipe is 16 cm. For point 2, the radius of the pipe is 8 cm. Find (a) the velocity at point 1; (b) the velocity at point 2; (c) the pressure at point 2 by using Bernoulli's equation where P + Rgy + 0.5 RV = constant. P is the pressure, R = density of fluid, V = square of fluid's velocity, g = gravitational constant of 9.81 N / kg and y = 2 m = difference of height at 2 points. The pressure of point 1 is 180 kPa.

1 Answers  

---

ELECTRICAL TECHNOLOGY - EXAMPLE 16.2 : In a selection of suitable heating equipment for drying of crystals of biochemical, the one of the lowest current consumption will be chosen for safety consideration. Selection is available : (A) 120 V microwave oven 1800 W. (B) 240 V conventional oven 11000 W. Which one should be chosen and why?

1 Answers  

---