Answer / manish patel

Due to any leakage in circuit component like a Transformer or
any device which earthed to Body or Directly mounted on Panel
Body will give shock.

Or

Panel body is directly used as neutral for Control supply
then Panel may give shock.

Answer / pradeep sharma

when machine shock the resion of this perticular insulation
is pancher, and return path of volatage is very high to
humane body,

Answer / manjinder singh sbbsiet

the machine gives shock when the insulation of wires used
inside the machine get damaged and that wire touches to the
machine. we can solve this problem by proper earthing.

what is the function of Droop CT and where it is used?

3 Answers   Lanco,

---

what is skin effect and corona discharge ?

4 Answers   Asian Paints,

---

How each of the following losses occur in d.c machines (i) copper (2)core (3) windage (4)friction please help me

0 Answers  

---

The synchronous speed of a motor with 6 poles and operating at 50 Hz frequency is ___.

4 Answers  

---

types of central Air conditioner plant?

0 Answers  

---

---

Should transformer earthing pit, to be connect to earthing mat in Substation

4 Answers  

---

Why in ESP Positive earthed

0 Answers   Sonhira,

---

i need to calculate high voltage line power factor daily basics but there is meter reading kwh and kvah while calculating power factor kwh/kvah formula was right. for examble there is point c=13kwh c=1.8 lag c=1.2 lead and c=14.5kvah like that i know that p.f =kwh/kvah but c=1.8lag kvarh and c=1.2lead kvarh points i dont know if u know please reply

1 Answers  

---

Write the analogous electrical elements in force current analogy for the elements of mechanical translational system.

0 Answers  

---

What happens if we give the supply to the rotor of induction motor and make its terminal shorted?

2 Answers  

---

what is power factor? whether it should be high or low? why?

11 Answers  

---

for a 500 KVA connected load, I calculated 30% of capactor for power correction. Even after using 225 KVR capactor PF is not improving. What could be reason for low Phase correction factor?

0 Answers   Power World,

---