Answer / sudhakar g

Due to form factor we can saw the HT voltages like
11,22,33,66kv
Example: 10kv*Form factor
10kv*1.11=11kv
Genrally in some areas only we can saw the 22kv supply from
substation to consumers...like in Mumbai we can saw that
22kv supply

what is the meaning of bus bar, in electrical panels.

13 Answers   HLG Habtoor Leighton Group,

---

What is meant by reverse polarity and how it can be fixed?

0 Answers  

---

High voltage test procedure of in swgr board. why should measure millivolt drop on testing time?

0 Answers   NTPC,

---

How to decide cable tray size?

0 Answers  

---

Will transformer heating be approximately the same for resistive, inductive or capacitive loads of the same VA rating? Explain.

1 Answers  

---

---

What is an alternator impedance value?

0 Answers   Orchid,

---

Transformer how to maintaince a check b check c check d check

0 Answers   DIC India,

---

Its possible to use 3core 2R of 240 sq.mm cable for 3phases & separely 50sq.mm 3core cable fully for Neutral for connection of PCC to MCC 3ph..4wire system?

0 Answers  

---

What is Load commutation and how it is done?Cite some example where this type of commutation is used

2 Answers   NTPC,

---

What Normal(Tangent) towers and Tension(Cut-point) Towers?

1 Answers   ABB, BGR Energy, NTPC, Powermec,

---

Application Comparison between 22KV (UE)and 33KV (E) system. Are we allowed to use 33KV (E) cable in lieu of 22KV (UE) cable. What are the technical disadvantages.

0 Answers  

---

What happens if the Capacitive Voltage Transformer Primary neutral is not earthed. There is a CVT between Transformer and source, and the CVT neutral of the transformer is not earthed, does it effect the transformer while charging or does it effect the transformer charging process.

1 Answers  

---